GUYS I NEED TO FIND A PLACE WHERE THEY CAN SEND ME OR BUILD ME 4 LINK BARS FOR MY SAS 90 CHEVY IM COILING IT OUT CUZ THE LEAFS AREN'T CUTTIN IT. AND I WAS WONDERING IF I SHOULD GO 2.5 INCH BAR OR SQUARE TUBING FOR THE LINKS. THE ENDS HAVE GOT TO BE 2.5 INCHS WIDE, 2 BARS AT 31' LENGTH AND 2 AT 15', AND A SWAY BAR AT 28 OYAH I NEED TO FIND 15' COILS ALSO! JUST LET ME KNOW WAT U GUYS THINK THANKS.

http://myspace-541.vo.llnwd.net/00903/14/58/903408541_l.jpg

2.5" links would be MASSIVE. 2" is plenty huge for a fullsize, just use an appropriate wall thickness like .250 or even .385........or .500:smokin:

Why are the leafs a problem? It could be simple enough to fix as your looking at a bit in joints for the 4 link, albeit I too wish I was linked up front, leafs are a little quirky.

That And It Was My First Sas And Used To Small Of Leafs Only 34's I Knew I Should Have Went All Out Off The Bat And Link It Up Front Cuz Id Just Do It Sooner Or Later!!! Fawk So Thats My Next Project But Atleast My Axle Is Already All Lined Up I Can Just Build The Links On Top Of It And Then Ditch The Springs, I've Been Lookin All Over The Internet And Can't Find Anyone To Build My F..kinglinks Yet An Ideas...

How hard is it really, to weld some tube inserts into some tube and thread in some ends?

Ya Dutch Thats Wat Im Asking, Wheeerrrreee Can I Get These Parrrrts!
U Dont Need To Write Some Stupid Ass Shit Puttin Other People Down, Just Do Wat Your Mom Says" If U Got Nothing Nice To Stay Dont Say Anything At All"!

poly performance

Ya Dutch Thats Wat Im Asking, Wheeerrrreee Can I Get These Parrrrts!
U Dont Need To Write Some Stupid Ass Shit Puttin Other People Down, Just Do Wat Your Mom Says" If U Got Nothing Nice To Stay Dont Say Anything At All"!


WOO I hate to say it but you are in the WRONG place for that. If you can do a SAS on your own then you should very easily be able to build some long arms. I plan on using 2" .250" wall DOM tubing for mine. ANd use some 1.250" Heim joints on both ends. Just loook around in the vendors section there are quite a few guys in there that sell the stuff that you need.

cool thanx thats the type of info im lookin for.

Ya Dutch Thats Wat Im Asking, Wheeerrrreee Can I Get These Parrrrts!
U Dont Need To Write Some Stupid Ass Shit Puttin Other People Down, Just Do Wat Your Mom Says" If U Got Nothing Nice To Stay Dont Say Anything At All"!


Well, if your question had been "where can I get parts for a 4 Link, instead of
GUYS I NEED TO FIND A PLACE WHERE THEY CAN SEND ME OR BUILD ME 4 LINK BARS

You would have gotten a ligit answer. :shaking:

Just weld them up fawker:flipoff2: like everyone else