PDA

View Full Version : what axles were under this truck

yjw/350
07-22-2006, 02:10 PM
its a mid 80's Ford 250 single rear wheel w/ the diesel... the reason i am asking is i can get the truck for dirt cheap and i would take the axles and scrap the rest
trkklr77
07-22-2006, 02:14 PM
could be either ttb 56/60 or a real solid d60
GubNi
07-22-2006, 02:38 PM
I think the front is a TTB D50, but the rear is probably a Sterling 10.25
brokebronco
07-22-2006, 03:21 PM
F250s came with either a ttb 44 8lug or the ttb 50, both with leaf springs. Depending on the year of the truck, it could have a semi or full floating 60 rear or the full float 10.25.
yjw/350
07-22-2006, 05:57 PM
whats this TTB D50 u guys are talking about???
trkklr77
07-22-2006, 06:30 PM
whats this TTB D50 u guys are talking about???

if you dont know i anit telling, you are better off not knowing.
animator
07-22-2006, 06:59 PM
if you dont know i anit telling, you are better off not knowing.


:laughing:


haha. yeah if you don't know what that is, you're on the wrong board.... :flipoff2:
Lars915
07-22-2006, 07:04 PM
If it's a 250HD it could have the D70U rear axle.
yjw/350
07-23-2006, 05:04 PM
ok so i went and looked at the truck today and its def. that weird-ass d50 TTB thing in the front , its like a cross between solid axle and IFS... the rear appears to be a D60, def. not the sterling, so i'm gunna see how much he wants for it..... another question, anyone have any idea how much i could sell a working hydrolic dump bed off that thing for???
trkklr77
07-23-2006, 05:34 PM
buy thing thing and make a dumping truck be trailer.
bremen242
07-23-2006, 07:20 PM
its a mid 80's Ford 250 single rear wheel w/ the diesel... the reason i am asking is i can get the truck for dirt cheap and i would take the axles and scrap the rest

could have a Dana 44/50TTB in the front..

the rear could be a Dana 61, 70, 70U, or sterling 10.25.
yjw/350
07-23-2006, 09:24 PM
buy thing thing and make a dumping truck be trailer.


could u translate that to english
trkklr77
07-23-2006, 09:29 PM
jew the price down so low he is paying you to take it away. rip the cab axle,motor,tranny,clip,gas tanks, and any thing else off of the frame. cut,bend,weld untill you have a trailer tounge, hook the hydro stuff back up to a battery and reregister as trailer.
-=AphiX=-
07-23-2006, 09:30 PM
wha yea that makes my brain hurt
trkklr77
07-23-2006, 09:30 PM
mine too.
gfbgreaser289
07-24-2006, 10:22 PM
its a 44 ttb front. the ttb50's didnt come out till early to mid 90's.
trkklr77
07-24-2006, 10:41 PM
either way its a piece of shit and only worth cutting up.
AllGoNoShow
07-25-2006, 08:25 AM
could have a Dana 44/50TTB in the front..

the rear could be a Dana 61, 70, 70U, or sterling 10.25.

....what he said.
Fordman500
07-25-2006, 10:32 AM
its a 44 ttb front. the ttb50's didnt come out till early to mid 90's.
Are you sure?
brokebronco
07-25-2006, 10:53 AM
Hmmm, let me look under my 86 f250. Oh Dang! A leaf spring setup with a Dana50!

Will wonders never cease........
trkklr77
07-26-2006, 12:36 AM
no they wont and ford will never cease to exist, damn the luck
bremen242
07-26-2006, 08:18 PM
its a 44 ttb front. the ttb50's didnt come out till early to mid 90's.

beep.

incorrect. F350s had them from 80-85, until they switched to Dana 60s.

depending on the GWVR, the F250 could have received either. any F250 with a GWVR of 8600 or lower had the dana 44. anything higher than 8600 had Dana 50s.

of course, there will always be exceptions, ie plow packages, special order, etc.

most extended cab F250s have Dana 50s, they are weighted ~8800lbs.