|
GloNDark 04-22-2002, 07:49 AM OK I go my old steering off..and pulled all stuff off the drivers side and mounted it on the passenger side. And last night right before I quit for the night, I was looking at the lower pulley/balancer. How in the fawk does that thing come off? After I remove the big nut, how the hell do I get a pulley puller in there?? There doesn't seem to be any bolt holes that I can use to pull with. WTF?? :confused: Mustard Dog 04-22-2002, 07:55 AM Can you use a regular three arm puller that will grab on the pully grooves? GloNDark 04-22-2002, 08:00 AM Originally posted by Mustard Dog Can you use a regular three arm puller that will grab on the pully grooves? I was thinking that I could use that, as long as the pulley holds up. As it sits right now though, is about my only option. :( DAMMIT! :D:D:D Jason M 04-22-2002, 08:10 AM Get a standard steering wheel puller. The Two bolt style. There are two (probably very dirty) holes that are on either side of the big nut. They might be covered up by the nut lock thingie... The holes are there. You just have to lood some more ;) GloNDark 04-22-2002, 08:28 AM Originally posted by Jason M Get a standard steering wheel puller. The Two bolt style. There are two (probably very dirty) holes that are on either side of the big nut. They might be covered up by the nut lock thingie... The holes are there. You just have to lood some more ;) Oh man I hope you are right. I just cruised over to my buddies house and checked out the motor he has in his garage, And sure enough, there they are. Dirty parts on my motor?? NEVER!! ;) HAHA Sprayed it with oil eater last night and before I left this morning, so tonight when I hit it with the pressure wash it, and "lood" into it further.. I ran outta :beer: last night, so it was time to quit....haha Jason M 04-22-2002, 08:50 AM Originally posted by GloNDark Oh man I hope you are right. I just cruised over to my buddies house and checked out the motor he has in his garage, And sure enough, there they are. Dirty parts on my motor?? NEVER!! ;) HAHA Sprayed it with oil eater last night and before I left this morning, so tonight when I hit it with the pressure wash it, and "lood" into it further.. I ran outta :beer: last night, so it was time to quit....haha Make fun of me will ya... See if I ever help you again:crybaby2: ;) GloNDark 04-22-2002, 08:55 AM Originally posted by Jason M Make fun of me will ya... See if I ever help you again:crybaby2: ;) haha the best part is, I actually sat here trying to figure out what you meant. haha It's early man, I forgive ya! :D GloNDark 04-22-2002, 09:08 AM Oh yeah, hey Jason, thanks for the idea about mounting the Pump to the existing alternator bracket. I used that mount and made a bracket the looks kinda like a shackle. Works perfect!! I will post pics, a write up and a spec sheet once I am finished with it completely. :D goldenarrow 04-22-2002, 02:51 PM I used a really big three arm puller on mine and it came off fine with a little elbo grese:) | |