zainyD
07-31-2006, 02:07 PM
I'm in Florida and will ship at the buyer's expense. Bought this stuff and don't need it anymore so I'm selling. Parts are off a 77.5-79 F250, not sure which one of those years from a HD D44.
What you get:
Ford Flat-top knuckles L/R, caliper stands(2), dual piston calipers L/R, Ford big bearing spindles(2). I will also include studs, nuts, and conical washers if you plan on having the passenger side knuckle milled, drilled, and tapped for hi-steer/crossover. The driver's side knuckle already has studs, cones, and nuts.
Great for converting to 8-lug, uses standard 9.72" Ford D44 stub shafts so it would be an easy swap on your 1/2 ton.
$150+shipping
What you get:
Ford Flat-top knuckles L/R, caliper stands(2), dual piston calipers L/R, Ford big bearing spindles(2). I will also include studs, nuts, and conical washers if you plan on having the passenger side knuckle milled, drilled, and tapped for hi-steer/crossover. The driver's side knuckle already has studs, cones, and nuts.
Great for converting to 8-lug, uses standard 9.72" Ford D44 stub shafts so it would be an easy swap on your 1/2 ton.
$150+shipping