A local scrap yard is trying to get 350 bucks out of me. I figured know more than 100, maybe 150 because there everywhere but maybe i'm wrong. Any thoughts???

I bought mine for $80. I see them mostly sell for $100-150, so you're right. If it was a CUCV 14 bolt with 4.56's and a Detroit, then for $350, go ahead and get it.

the junk yards around here are crazy. they would want 800 for it. It is normally cheaper to find a complete truck sitting beside someones house and buy the whole thing for a couple hundred dollars. I would call around to many yards in your area to get a better idea of what they are going for locally. CUCV rear around here for 500 to 800. The local military yard asks 800 each for them.

-Dan

I sell them outright for $150 and I have several let me know if your interested we can also add covers, trusses, disc kits & pinion guards for added $$$. I also have good rate for truck freight. Thanks Shawn

$80-120 is the going rate for a decent one.

Dan, I should be sending 14 bolts over to Alabama!

i got mine for $35 at the steel yard. the local pick-n-pull has them for $63 (no drums)

$150 for 4.10 gears, limited slip in the nickel ads around here.

Alright I found a PNP that's got them for 95 bucks. I just have to decide which one I want. Actually now i'm thinking of tossing a 9 inch under my truck instead for ground clearance. I never plan on anything more than 35's and 31 spline 9 inch should handle that. I hate making decisions.

Alright I found a PNP that's got them for 95 bucks. I just have to decide which one I want. Actually now i'm thinking of tossing a 9 inch under my truck instead for ground clearance. I never plan on anything more than 35's and 31 spline 9 inch should handle that. I hate making decisions.


i killed stock shafts on my 9" with 33's, it has a mini-spool to help that

I sell them outright for $150 and I have several let me know if your interested we can also add covers, trusses, disc kits & pinion guards for added $$$. I also have good rate for truck freight. Thanks Shawn
Got one from a Van?

$100

I paid $176 of a Van type FF. 3.73 gears and open carrier. There's been one for sale for $650 :eek: I bet no one will buy it.

I just watched a bunch end (brand new-marking paste still on them) with detroits and 4:56 gears on govliquidation.com

150 to 200.00 each! in the crate

local yard here wants 150.00

Around here anywheres from 100. to 500. depending on what you want and what it is out of. Your standard 14b out of say a 3/4 ton 100. If you want one out of a 1 ton dually that has 4.56s and is complete with brake cable that has not been hacked and brake lines that have not been cut you will pay close to 500, u-bolts and plates included.

Some will still have the shocks and maybe rims on them.

Hey K5 PickN'Pull is havin a 50% off in SA this weekend! 2 bucks to get in the gate, but if you pull the beast off a truck yourself you could get it half off. :D Just got that email today, hoping to go myself actually.

paid $750 for mine but got th400 np205 d 60 front and the rest of a 85 k3500 thrown in for free:flipoff2:

i paid 37.50 for mine totally complete with 3.73's, brake lines and ebrake cables

The u-pull it here has them for $119.

paid $750 for mine but got th400 np205 d 60 front and the rest of a 85 k3500 thrown in for free:flipoff2:


Not bad

Got mine for 1/2, $50 canadian, thats like $3 for you guys :)

Did that cucv 14 bolt come stock with a Detroit? If so what type of rig did they come in?

Did that cucv 14 bolt come stock with a Detroit? If so what type of rig did they come in?


I'm also interested in this information. Sounds like a hot ticket for me..

I got mine for 200, but the local ass-raping pick-n-pull wants 500 :barf: :eek: On top of that rediculus price they tried to tell me that they dont have very many because that rear end is week and wears out quickly, and that the 12 bolt is the strongest rear end made. :shaking: I left there very quick befor I got into an argument or became dumber from listening to this dumb ass :laughing:

I got mine for 200, but the local ass-raping pick-n-pull wants 500 :barf: :eek: On top of that rediculus price they tried to tell me that they dont have very many because that rear end is week and wears out quickly, and that the 12 bolt is the strongest rear end made. :shaking: I left there very quick befor I got into an argument or became dumber from listening to this dumb ass :laughing:



hahahaha, id go back and sell them 12 bolts left and right then

I got my 14 bolt ff with 4.56's C&C for free, this usually does not happen for me I usually pay too much.

So what type of rig do they come in? And is the Detroit come stock? And how the hell could a 12 bolt be stronger then a 14, doesnt make any sence. Does anyone have any info on unimog axles.