kyle01041981
08-04-2006, 09:28 AM
Price:$3200 For all or will sell 350 and jeep seperate Location:Tullahoma TN 37388
1991 Jeep Wrangler Sahara 4.0L (Jeep was complete and running when I bought, I disasemmbled it when I started on my buildup.
I have a built 350 with conversion motor mounts.
*4 Bolt Main bored .060
*Gmx Roods w/ ARP Bolts, SpeedPro Hypertech Flattop Pistons/Rings
*2.02 Intake 1.600EX Manley Valves
*Manley Springs and Retainers
*Lunati Cam 465-490 Lift
*270/280 Dura. 106 C/L
*GM291 300HP Heads Ported & Polished
*GM Cast Crank 020/020
*Melling High Pressure pump, pickup screen, oil pump rod
*Cloyes Double Roller Set
*Head Cut to 60cc's with Screw in Studs & Guide Plates
*King High Performance Rodd Main Bearings
*Clevlite Cam Bearings
*New High Performance Plug Wires
*Rebuilt HEI Dist. w/ New Pickup Coil
*Also have new High Perf. Module & Wiring Harness
*New Aluminum Water Pump
*Some used Pulley's and Misc. bolts
*No oil in Engine (WILL NEED TO BE PRIMED BEFORE STARTING)
*Tunned Port Fuel Injection w/ big injectors and corvette computer, no wiring harness(TPI is just sitting on motor it is not assembled needs bolt kit and gasket kit.
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0008.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0009.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0013.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0005.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0003.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0002.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0001.jpg
I am located in Tullahoma TN 37388
I will take $3200 for everything I have.....Need Money(Got Married, Made Baby:D )
I have not applied for title on jeep...It was bought from an impound in New Jersey as an abandoned vehicle. I have all documentation to apply for title Though, I wasnt sure I was going to since I was going to trailer the jeep to the trails. I do not have the drivers side sahara edition seat it is just a straight back jeep seat. The passenger and rear are sahara. As you can see in the picks there is a little rust but only in the kick panel I have worked most of the driver side out and welded in new sheet metal on passenger side(just needs finishing). the front of the finders have a few small dents but other than what I have mention body and frame appear to be in good condition. I do not have a top or doors.
Any questions (931)636-5599 Serious Inquiry Only!
1991 Jeep Wrangler Sahara 4.0L (Jeep was complete and running when I bought, I disasemmbled it when I started on my buildup.
I have a built 350 with conversion motor mounts.
*4 Bolt Main bored .060
*Gmx Roods w/ ARP Bolts, SpeedPro Hypertech Flattop Pistons/Rings
*2.02 Intake 1.600EX Manley Valves
*Manley Springs and Retainers
*Lunati Cam 465-490 Lift
*270/280 Dura. 106 C/L
*GM291 300HP Heads Ported & Polished
*GM Cast Crank 020/020
*Melling High Pressure pump, pickup screen, oil pump rod
*Cloyes Double Roller Set
*Head Cut to 60cc's with Screw in Studs & Guide Plates
*King High Performance Rodd Main Bearings
*Clevlite Cam Bearings
*New High Performance Plug Wires
*Rebuilt HEI Dist. w/ New Pickup Coil
*Also have new High Perf. Module & Wiring Harness
*New Aluminum Water Pump
*Some used Pulley's and Misc. bolts
*No oil in Engine (WILL NEED TO BE PRIMED BEFORE STARTING)
*Tunned Port Fuel Injection w/ big injectors and corvette computer, no wiring harness(TPI is just sitting on motor it is not assembled needs bolt kit and gasket kit.
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0008.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0009.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0013.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0005.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0003.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0002.jpg
http://i109.photobucket.com/albums/n51/kyle01041981/PHTO0001.jpg
I am located in Tullahoma TN 37388
I will take $3200 for everything I have.....Need Money(Got Married, Made Baby:D )
I have not applied for title on jeep...It was bought from an impound in New Jersey as an abandoned vehicle. I have all documentation to apply for title Though, I wasnt sure I was going to since I was going to trailer the jeep to the trails. I do not have the drivers side sahara edition seat it is just a straight back jeep seat. The passenger and rear are sahara. As you can see in the picks there is a little rust but only in the kick panel I have worked most of the driver side out and welded in new sheet metal on passenger side(just needs finishing). the front of the finders have a few small dents but other than what I have mention body and frame appear to be in good condition. I do not have a top or doors.
Any questions (931)636-5599 Serious Inquiry Only!