|
Rubicrawler 04-23-2002, 01:44 PM I hate to ask such such a dumbasss question, but I couldn't find the info in my search. How wide (WMS to WMS) is a full size 9"? Do they vary? I'm looking for something 62-63" wide. Preferably 78 and newer :) TIA :D Mondo EB 04-23-2002, 02:47 PM Mark, my 77 f150 4wd is just over 64" , should be the same up to 79 including the big broncos. This sure comes up a lot, too bad theres not a page with all the widths. IIRC the early 70's 2wd f150 is closer to 62" welndmn 04-23-2002, 03:15 PM Yeah i heard a rumor that some f100s were 61-62 and the driver and passerger were the same size! I would love one of those, but then again, its only a rumor, i have never seen one Rubicrawler 04-23-2002, 03:50 PM Thanks guys! Sounds like it's 64" and I can live with that (I think:)) I want a 31 spline big bearing unit fo sho. Should fit well under my daughters Scout! clc900 04-23-2002, 03:54 PM 70's 4x4 F-150's should be 65". The 2x4 9's should be shorter. 62-63"???? Mondo EB 04-23-2002, 03:58 PM Don't know about the other years but the 77 gets you the burly banjo housing and equal length 31 spline shafts Rubicrawler 04-23-2002, 08:41 PM Originally posted by MIke Mondloch Don't know about the other years but the 77 gets you the burly banjo housing and equal length 31 spline shafts Now you're talkin'! Makes carrying spares much easier! Aggro 04-24-2002, 10:06 AM Originally posted by welndmn Yeah i heard a rumor that some f100s were 61-62 and the driver and passerger were the same size! I would love one of those, but then again, its only a rumor, i have never seen one I have seen two of these in my whole life. These early "narrow" housings are everywhere in the wrecking yards, but most have 28 spline shafts. ONLY the 60 to 62? 4wd's had the larger shafts. I know where one is right now in a running truck and it even has a nodular housing!! Rubicrawler 04-24-2002, 10:09 AM Originally posted by Aggro I have seen two of these in my whole life. These early "narrow" housings are everywhere in the wrecking yards, but most have 28 spline shafts. ONLY the 60 to 62? 4wd's had the larger shafts. I know where one is right now in a running truck and it even has a nodular housing!! Does it have 31 spline axles? Is it for sale? welndmn 04-24-2002, 11:19 AM You can make it 31 spline when you lock it, and buy some cromo shafts Having equal lenght axles would be very nice! Rock Puppy 04-24-2002, 12:01 PM Originally posted by welndmn Yeah i heard a rumor that some f100s were 61-62 and the driver and passerger were the same size! I would love one of those, but then again, its only a rumor, i have never seen one I for 2 of them 61 1/2" wms-wms off a 71 and a 72 F100 2wd one has a 360 fe stock the other had a 302 stock. Check the bone yards they should have them. The Rockslut 04-24-2002, 01:27 PM I have pulled (2) 9" from Pick N Pull. One from a 79 2wd F150. ~66" and another from a 86 2wd F150 again ~66". Obviously big bearing 31 spline. welndmn 04-24-2002, 02:42 PM Originally posted by The Mud Puppy I for 2 of them 61 1/2" wms-wms off a 71 and a 72 F100 2wd one has a 360 fe stock the other had a 302 stock. Check the bone yards they should have them. Yeah i can't wait the hit them again, I hate my rear being soo narrow and the front is 59.5 with the chevy disc, throwing a 61 inch rear will be very nice | |