I just had my original shaft converted to 18" slip and it came out
sweet! I would highly recommend them to all. Both Gary and John
who work their own jeeps and are both big into wheelin.

As close as u r to High Angle, and the fact that he supports this BB and gives away shafts, I find it hard to belive U went somewhere else???:confused: :confused: :confused:

Originally posted by rockhog
I just had my original shaft converted to 18" slip and it came out
sweet! I would highly recommend them to all. Both Gary and John
who work their own jeeps and are both big into wheelin.


Kiss ass:flipoff2: :flipoff2: :flipoff2: :flipoff2:

Originally posted by SeaBass44
As close as u r to High Angle, and the fact that he supports this BB and gives away shafts, I find it hard to belive U went somewhere else???:confused: :confused: :confused:

Just because jesse supports the board and gives away shafts mean absolutly shit. Im not dogging jesse... hes a great guy.. ive talked to him a few times.. but Stockton driveline does awesome work.. and just because they cant promote on this board like jesse because no one will let them(webmasters).. doesnt mean jesse is the only one to go to..

Just wait.. Driveline service is about to come out with something that will blow the socks off of jesse :D :rasta:

ron practically lives down teh street from that place, hell id keep a local guy a live too i think! jiMMy

I just wanted to let people know on this board that I have had
excellent service from a local shop. i know high angle does great
work and so do these guys.

Originally posted by rockhog
I just wanted to let people know on this board that I have had
excellent service from a local shop. i know high angle does great
work and so do these guys.

Including that in the org post would be nice, no u r sounding like a jerk:( with the last post to me, about "blowing socks off" nice, real nice...

Originally posted by SeaBass44


Including that in the org post would be nice, no u r sounding like a jerk:( with the last post to me, about "blowing socks off" nice, real nice...

Whatever floats your boat

Originally posted by SeaBass44


Including that in the org post would be nice, no u r sounding like a jerk:( with the last post to me, about "blowing socks off" nice, real nice... calm down!

I'll give a thumbs up to "Hogs" post. Hell make it 2. Those guys served me well too. Great service, fast turn around and I work down the street from the place so I have to use them.

its all good and i'm sure there's alot of guys working hard to make good products , and i welcome driveline service to compete and make better products -it makes all of us have a better way to get what we want- no breakage ! so lets not get all pissy , there's no need - buy and promote who ever takes care of you- Jess:D

Originally posted by onetoncv
its all good and i'm sure there's alot of guys working hard to make good products , and i welcome driveline service to compete and make better products -it makes all of us have a better way to get what we want- no breakage ! so lets not get all pissy , there's no need - buy and promote who ever takes care of you- Jess:D god has spoken!

I also remeber hearing from alot of other driveline companies that the internet is a joke - there's nothing there- And i strongly disagree , and maybe they are all seeing the light? Its been good to me and i apprecaite all the help along the way and enjoy talikng with all the guys with projects - and making things better when ever i can- Jess:D

Originally posted by onetoncv
I also remeber hearing from alot of other driveline companies that the internet is a joke - there's nothing there- And i strongly disagree , and maybe they are all seeing the light? Its been good to me and i apprecaite all the help along the way and enjoy talikng with all the guys with projects - and making things better when ever i can- Jess:D
I understand, I asked and someone else stepped in to anser and got pissy, I didn't even ask that person:p I'll be in Paridise tomorrow, I'll be stopping by to meet U Jess:D :D

Originally posted by onetoncv
its all good and i'm sure there's alot of guys working hard to make good products , and i welcome driveline service to compete and make better products -it makes all of us have a better way to get what we want- no breakage ! so lets not get all pissy , there's no need - buy and promote who ever takes care of you- Jess:D


You are a class act, Jesse

Originally posted by The Jerk
god has spoken! :rolleyes: :rolleyes: :rolleyes: :rolleyes:

Originally posted by ImKuNfusED


Just wait.. Driveline service is about to come out with something that will blow the socks off of jesse :D :rasta:

Sounds like a challange !!!! :eek: :D

how about being a little more specific about this driveline service thing they are coming out with. oh yeah and what is their web addy?

jesse- exactly

seabass- ass

I run jesse's shaft up front and DLS of Stockton on the rear. I am VERY happy with them BOTH! I got the rear from DLS out of a trade/deal so it was just cost effective, bottom line. I Highly recommend BOTH High Angle and DLS of Stockton. Both Gary and Jess are top notch doods. Simple as that.

For those of you that feel like Mr. Bass, please remember that not all of us live on POR for POR and it's vendors. Myself and many others I know work with smaller, local guys whom we've built valuable relationships with. I would never jeapordize my local contacts and place their business elsewhere.

Peace. Out. :flipoff2:

I run Stockton Drive Line Service. Gary has taken EXCELLENT care of me on 5 shafts and many small things like yokes, joints, etc.

I got big props for Jesse, but Gary is a guy I wheel with, hang out with and am friends with. I agree with Loppy, I like to keep my contacts. I have dealt with Jesse in the past, and I will/would again anytime, I think he is great and his service is obviously fantastic as well.

:beer:

I used to use DLS when I lived in Stockton.... John is a good friend of mine from back in the day. High Angle is my supplier because he is a can do guy... I have him make me stuff that doesnt see the BB here that is so far ahead as far as adapting this to this it would blow your mind. Never had a shop try so hard to make something work and suceed.


Mike-

Originally posted by swamper502
how about being a little more specific about this driveline service thing they are coming out with. oh yeah and what is their web addy?

Dont know if im suppose to spill the beans or not.. havent heard yet.. but a little more specific... its a driveshaft :flipoff2: :flipoff2: :flipoff2:

Originally posted by swamper502
how about being a little more specific about this driveline service thing they are coming out with. oh yeah and what is their web addy?

Oh yeah.. i dont have their website offhand.. but you might do a search in yahoo or something for DLS of fresno.. same place.. same owner.. same GM..

Originally posted by Snowball
I used to use DLS when I lived in Stockton.... John is a good friend of mine from back in the day. High Angle is my supplier because he is a can do guy... I have him make me stuff that doesnt see the BB here that is so far ahead as far as adapting this to this it would blow your mind. Never had a shop try so hard to make something work and suceed.


Mike-



Thats excactly how I look at Jesse's work also.
He is willing to fabricate or experiment with drivelines that are unique to extreme off road vehicles.
It also appears that he really enjoys the challenge, of generating solutions for difficult problems.

Jesse is no doubt, one of the best driveline fabricators in the country when it comes to Off road Drivelines.
Just as important though, he has class and integrity.
I informed Jesse, a few weeks ago, that I was going to begin testing, and promoting for Jim Reel (J.E. Reel Drivelines), his line of Driveshafts and custom yokes, that is being developed for RockCrawling. I was very impressed when he responded by contacting Jim, and welcoming him into the sport.
In any case, I think it also fanned the flames of Jesse's competetive fire.
With the success that Jack Graef of CTM and, companies like High Angle are having with thier high quality drive train parts, I suspect there are no limits, to what we may see being fabricated in the near future.

right on the nose jeff!!!! Jess

Originally posted by camo
jesse- exactly

seabass- ass
thx for everyone jumpin my shit;) I only asked why, didn't know I was pissin on your oat brain:p :p :p I didn't ask to be a dick, but if I came off that way, great:D :D

lol, I ment Sorry ROCKHOG:D I ment no ofence to you or his other customers;) just an honest question is all, it just got takin the wrong way by some of u:)

Originally posted by ImKuNfusED


Just because jesse supports the board and gives away shafts mean absolutly shit. Im not dogging jesse... hes a great guy.. ive talked to him a few times.. but Stockton driveline does awesome work.. and just because they cant promote on this board like jesse because no one will let them(webmasters).. doesnt mean jesse is the only one to go to..

Just wait.. Driveline service is about to come out with something that will blow the socks off of jesse :D :rasta:

I alredy have the shaft james is talkin about....its one big mother fuckin CV shaft....or a BAMF (bad ass mother fucker) is what Driveline service calls it :grinpimp:

Let me get this straight there's other custom drive line shops out there, other than Jesse!!!!!!!!!!!!!!!!!!!
Na don't think so :shaking:
Jesse's customer service and products are second to no one.He's made the shafts for my rigs and all my friends.The one time we had a problem he fixed it for free and it wasn't his fault eek: that's what I'm talkin about

Scott :beer:

Its cool SeaBass, I only did this post to give some local guys the
credit they deserve and that i would recomend their service for
local wheelers.

Originally posted by rockhog
Its cool SeaBass, I only did this post to give some local guys the
credit they deserve and that i would recomend their service for
local wheelers.

That's completly cool, glade u understand. I met Jess today, what a cool guy, I think he gets a little embarresed about all our bragging though...lol fame, he has to live with it;)

DLS of Sacto does great work also. I had them lengthen a tom woods shaft, fix the double carden and throw a new 1310 join in it for $93. The second woods shaft came from tom too short and I will be sending it to DLS also.

Were talking welding splined spice parts to tubing here, guys. No rocket science so there is nothing wrong with keeing biz local.

SeanP

Originally posted by chaz88k5


I alredy have the shaft james is talkin about....its one big mother fuckin CV shaft....or a BAMF (bad ass mother fucker) is what Driveline service calls it :grinpimp:

nothin like a balanceable high angle cv shaft.. if i remember right.. no binding at like 50* right??

let's see pic's - come awn!Jess:D

Originally posted by onetoncv
let's see pic's - come awn!Jess:D

LOL... dont worry jess... i will get ya some pics of it.. i dont know if chaz will take them and post them.. or if i will get them with my camera.. so far chaz is running the shaft in the back of his blazer... Going great so far... From what i know.. DLS has sold BAMF's since they created it a little while ago

is this possibly a weasler c/v -hehe- :D agg stuff bring it- Jess

Originally posted by onetoncv
is this possibly a weasler c/v -hehe- :D agg stuff bring it- Jess

;) :p ACTUALLY IM NOT SURE ON WHAT CV THEY ACTUALLY USED.. IF I PAIDED ATTENTION LAST NIGHT WHEN WE WERE WORKIN ON CHAZ'S BLAZER ON THE SIDE OF THE HIGHWAY WHEN HE SHEERED OFF 6 BOLTS ON THE BEADLOCK AND LOST THE BEAD.. I COULD TELL YA

Originally posted by ImKuNfusED


;) :p ACTUALLY IM NOT SURE ON WHAT CV THEY ACTUALLY USED.. IF I PAIDED ATTENTION LAST NIGHT WHEN WE WERE WORKIN ON CHAZ'S BLAZER ON THE SIDE OF THE HIGHWAY WHEN HE SHEERED OFF 6 BOLTS ON THE BEADLOCK AND LOST THE BEAD.. I COULD TELL YA

I should get some pics up as soon as my normal computer is back up and runnin...the one i am on now it a pos imac and cant even upload my pictures from my camera...

Originally posted by chaz88k5


I should get some pics up as soon as my normal computer is back up and runnin...the one i am on now it a pos imac and cant even upload my pictures from my camera...
THATS WHY I HAVE MY DIGITAL FOR GENIUS..

Originally posted by ImKuNfusED

THATS WHY I HAVE MY DIGITAL FOR GENIUS..

Well shit man get to snapin pictures!..haha :flipoff2: :flipoff2:
oh yea thanks for the help last night.

Originally posted by chaz88k5


Well shit man get to snapin pictures!..haha :flipoff2: :flipoff2:
oh yea thanks for the help last night.

Well im leaving early tomorrow morning to dallas texas.. so no way i can do it.. maybe monday night or something?