Nordic1
08-11-2006, 11:27 PM
Um... I'm confused
http://www.fototime.com/%7B84426A76-5DDF-4CEF-8C00-B21661413755%7D/picture.JPG
I pulled the cap off of the hub and the c-clip... as well as the brakes but I have no idea how to get the shaft out...
Can somebody link me to a PDF or whatever on dana 44 front hub dis-assembly? Thanks
NetBSD
08-11-2006, 11:37 PM
if the snap ring is out from the hub that thing with the 2 bars coming off will wiggle out, but dont forget there are snap rings on the shaft, and around the inside of the hub
EDIT, close inspection of your pic shows you still have that ring inside the hum, look about 3/8" from the outside in, you will see that little ring, after that is out youll get the hang of the rest
Nordic1
08-11-2006, 11:50 PM
if the snap ring is out from the hub that thing with the 2 bars coming off will wiggle out, but dont forget there are snap rings on the shaft, and around the inside of the hub
EDIT, close inspection of your pic shows you still have that ring inside the hum, look about 3/8" from the outside in, you will see that little ring, after that is out youll get the hang of the rest
cool thanks man
Snap rings at the arrows in this pic:
http://www.dana60.com/csp/snaprings.jpg
Um... I'm confused
Can somebody link me to a PDF or whatever on dana 44 front hub dis-assembly? Thanks
Nice 70's lockout!
Try here -> http://77cj.littlekeylime.com/Mr.N44.htm