|
Mud Slayer 2.0 08-14-2006, 12:53 AM Who sells these ?? My buddy is lookin for one for his truck and doesnt wana make a homemade one.. We've both seen them before on dodges just cant find a place that sells them.. 1500 318 std cab long box if that matters ( shouldnt cause it comes out of the fender) Pavemen 08-14-2006, 02:05 PM never seen one explicitly designed for the dodges. 1990k5 08-15-2006, 09:13 AM they dont make them for that application, ive been looking for a way to put one on my 1992 cummins, just have to get the head and through the fender piece from an xj or somthing and make it work. sprueitt 08-15-2006, 12:21 PM Who sells these ?? My buddy is lookin for one for his truck and doesnt wana make a homemade one.. We've both seen them before on dodges just cant find a place that sells them.. 1500 318 std cab long box if that matters ( shouldnt cause it comes out of the fender) I had to make my own. I looked everywhere and I don't think they make one for Dodges. Here is a picture of mine. We made it out of 4 inch exhaust tube. You can see some dents in the snokel from TTC. http://www.urbansurvivors.com/trex/images/01sDSCF0372.jpg jensenkennels 08-15-2006, 03:57 PM they dont make them for that application, ive been looking for a way to put one on my 1992 cummins, just have to get the head and through the fender piece from an xj or somthing and make it work. If your not in a BIG hurry, I'm putting one on my '79/'92 project- http://www.pirate4x4.com/forum/showthread.php?t=448507 I measured the angle and length of the windshield pillar in relation to the pass. fender and then measured the fender length and compared those numbers to all the Safari Snorkel numbers. And came up with the model #SS75HF. Preliminary test fitting loks real good! It will be some time before it goes to the bodyshop for mounting though. MADDOG 1990k5 08-16-2006, 09:36 AM maddog, i appriciate that, what is that model# supposed to fit? is it an arb? thx jensenkennels 08-16-2006, 03:24 PM #SS75HF is for a 70 , 73, 75 & 78 series Toyota Landcruiser. These snorkels are made by Safari Automotive Technologies and marketed by ARB. I don't believe ARB actually makes a snorkel. http://www.safari4x4.com.au/docs/product.htm MADDOG Sorry for the hijack Mud Slayer 1990k5 08-17-2006, 08:50 AM maddog, it also looks like model#ss20hf would be a good canidate since it steps in a little form the fender to the windsheild pillar, check it out, it is for a mitsubishi pajero. i e-mailed them to see if they would sell just the head and outside tube. JC | |