OFRD_GRL
08-20-2006, 06:34 PM
kind of.
skyjacker apparently gave the wrong hardware.
the front bushing install the instructions sucked - so we made it up to get it done and im gonna call them tomorrow to see if we did it right - or if the parts they gave me were wrong altogether.
the rear.. they didnt give any of the bushings for the new rear swaybar end links to go in. so im running without the swaybar attached in the rear...
again going to call them tomorrow.
its nice and all i got the first kit they made... but it sucks that the kit didnt have what i needed after we got the truck apart... (everything seemed ok until we went installing it.. we had the right amount of bushings in the correct colors for everything.. just not any of the right stuff after we tried using it - or some of the right stuff.. or whatever)
im just glad i have the 4runner to drive till i figure this all out
and pics before/after and a few install ones when i remembered to grab the camera.. when we werent figuring out the stuff that was wrong in the kit LOL
BEFORE:
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce9854882bca0700000007100IZMWzVsyZMS
stock suspension
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce985488284b3400000007100IZMWzVsyZMS
sway bar end link removed
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce98548829ca0500000007100IZMWzVsyZMS
strut unbolted at bottom
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce985488164b0a00000007100IZMWzVsyZMS
after alot of agrravation.. and cursing at skyjacker... and just deciding to do what looked like the best option.. skyjacker strut installed
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce98548817ca3b00000007100IZMWzVsyZMS
spring hitting UCA (at full droop) because were not 100% sure we got it all right, but its the only way it would have worked
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce985488144b0800000007100IZMWzVsyZMS
using factory bushing on top even though skyjacker gave one.. but it wouldnt work any way we could figure it out
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce98548815ca3900000007100IZMWzVsyZMS
lift fully installed
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce985488124b0e00000007100IZMWzVsyZMS
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce9854881e4b0200000007100IZMWzVsyZMS
skyjacker apparently gave the wrong hardware.
the front bushing install the instructions sucked - so we made it up to get it done and im gonna call them tomorrow to see if we did it right - or if the parts they gave me were wrong altogether.
the rear.. they didnt give any of the bushings for the new rear swaybar end links to go in. so im running without the swaybar attached in the rear...
again going to call them tomorrow.
its nice and all i got the first kit they made... but it sucks that the kit didnt have what i needed after we got the truck apart... (everything seemed ok until we went installing it.. we had the right amount of bushings in the correct colors for everything.. just not any of the right stuff after we tried using it - or some of the right stuff.. or whatever)
im just glad i have the 4runner to drive till i figure this all out
and pics before/after and a few install ones when i remembered to grab the camera.. when we werent figuring out the stuff that was wrong in the kit LOL
BEFORE:
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce9854882bca0700000007100IZMWzVsyZMS
stock suspension
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce985488284b3400000007100IZMWzVsyZMS
sway bar end link removed
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce98548829ca0500000007100IZMWzVsyZMS
strut unbolted at bottom
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce985488164b0a00000007100IZMWzVsyZMS
after alot of agrravation.. and cursing at skyjacker... and just deciding to do what looked like the best option.. skyjacker strut installed
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce98548817ca3b00000007100IZMWzVsyZMS
spring hitting UCA (at full droop) because were not 100% sure we got it all right, but its the only way it would have worked
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce985488144b0800000007100IZMWzVsyZMS
using factory bushing on top even though skyjacker gave one.. but it wouldnt work any way we could figure it out
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce98548815ca3900000007100IZMWzVsyZMS
lift fully installed
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce985488124b0e00000007100IZMWzVsyZMS
http://shim1.shutterfly.com/procgserv/47b6d601b3127cce9854881e4b0200000007100IZMWzVsyZMS