Has anyone here used an SD508/Sanden compressor as a pump for their on board air and if so how have you lubricated the pump. I cant fit a york on my 22RE as my steering box and torque rod bracket get in the way. Also what pressure reg and other bits would i need.

Ps; I need this to run ARBs as well as airing tyres and hopefully running tools. I already have an ARB pump and a large storage tank fitted.


*hiding in the corner waiting for DRM to flame me for not searching*

http://www.eugenestuff.com/TomAir/index.html

HTH,

Do you have AC if not stock compressor.

Go to www.onboardair.com

Brad has been nice enough to put all the info on one page for us..


This was a topic last week Do a search

It's for a Toy... like mentioned several have used the Toy A/C compressor. If you are trying to keep your working A/C and add a 2nd compressor there are a couple of guys that have added a York mounted on the passenger side above the stock A/C. Try a search on the Toy board or a post over there. I remember a thread with close ups of the adaptor plate they fabbed up...maybe EricB??

Search Newbie :flipoff2:

I use mine, and I don't oil it, been using for two years and no problems.

York and stock AC compressor stuffed onto 22RE:
http://home.off-road.com/~bibelheimer/images/photo_cd/oba/

And lotsa other helpful OBA links:

http://www.rivercityrockcrawlers.com/~vovae/onboard.htm

I cant use the York as im in AUS and there is a powersteer box and torque rod mount next to my stock AC pump. And yes i want to keep the stock AC. Mounting the Sanden pump is no prob i just wanted to know how others were oiling it.

I've been using a sanden for about a year with only a little air tool oil squirt every 5-10 times I use it. Works great.
I have a small cotton filter on the intake and I just put the oil directly on that while it's pumping.