|
chrise30 08-21-2006, 09:10 PM So I timed the truck 88 GMC 350 but it wont stay timed I have a new brain in it a newer distributor and dont know what else to do Any one with ideas? thank you for your time in this Chris KWTMECH 08-21-2006, 09:15 PM What exactly do you mean it won't 'stay timed' and how are you adjusting it? chrise30 08-21-2006, 09:25 PM well it is retarding when you hit the gas and I cant figure out why thanks Chris KWTMECH 08-21-2006, 09:34 PM How are you adjusting it? Are you unplugging the spout connector and setting it to zero? chrise30 08-21-2006, 09:38 PM yes I am unplugging the connector but not setting it to zero unsure on that could you please inform me on the right way to time this I would be great if you could Jeepermat 08-22-2006, 08:40 AM Unplug the connector by the distributor, then set timing to 0, shut off and tighten dist., recheck, then plug connector back in. PizzaFarno 08-22-2006, 08:43 AM did this same thing almost, just bring to a pro to re-time. now it works great! chrise30 08-22-2006, 05:13 PM thanks I will do that in a bit. I thank you all for your help ALLJACKEDUP 08-24-2006, 03:25 AM The wire is under the cover on the passinger side on the firewall, it's a singal wire you need to unplug on the tbi motor, time it to zero tighten the distributor turn off motor plug back in wire start up motor and the brain will set it to the proper order of firing and it wont be at zero because the brain box will reset it to fire at tdc | |