|
bigjeepinYJ 04-25-2002, 09:22 PM I was getting ready to start grinding on my 14 bolt and took a quick measurement under the rig. Will it bolt up without moving the perches? I have searched and sae a post that they were moving perches on one but it was a fullsize down to a jeep. I didnt know if the C&C was different. I have a 92 YJ with 44044's. Thanks alot. Give me an answer or shoot me in the right direction! :jeep: 66CJdean 04-25-2002, 09:37 PM Hook a tape on the outside of the rear springs and pull it over to the inside of the other and that will tell you the C to C. I think the rear of a YJ is 41. bigjeepinYJ 04-25-2002, 09:52 PM Originally posted by 66CJdean Hook a tape on the outside of the rear springs and pull it over to the inside of the other and that will tell you the C to C. I think the rear of a YJ is 41. Well if that is right it ought to be close. If H8 or some of those other guys could give me any help. I have a tweaked spring on one side and it isnt perfect that is why I was asking. I came in for the night and was just looking for the quick and easy answer (arent we all). CSP 04-26-2002, 08:34 AM If your spring is tweaked just measure what the center distance is on the fixed hangers or the shackle hangers. This really isn't a difficlult thing to figure out. Scout Dude 04-26-2002, 09:01 AM Jeff (H8Monday) bolted his right in...but he has different springs in the rear and he may have moved his mounts a bit...it's definitely very close if not exactly the same. I think that a DUALLIE 14 bolt has the pads set ~40";) bigjeepinYJ 04-26-2002, 10:57 AM Originally posted by Scout Dude Jeff (H8Monday) bolted his right in...but he has different springs in the rear and he may have moved his mounts a bit...it's definitely very close if not exactly the same. I think that a DUALLIE 14 bolt has the pads set ~40";) Thanks alot for the answer. I think that it will. I was done working on that heap and figured that someone could shoot me an answer. bigdude 04-26-2002, 04:49 PM From a C&C it should be the right width, you'll need to shim it but you are ight they are close enough to not care. I think YJ is 40.5" or 41" in the rear. Yes I have talked to people who did this and all they did was shim for the pinion and use the stock perches. Good luck bro. My wheelbase came to 99" with 44044s F&R. wheelinjp 04-26-2002, 06:46 PM Just to re-iterate what everyone has said, YES the c&c bolts in. I would just shim it. bigjeepinYJ 04-26-2002, 09:10 PM That is awesome. I just got in and read the posts. Well I guess that I will slide that puppy under there and see what shims I need. I cant wait! | |