|
: No torque arm on a 999 auto? JohnC 09-05-2006, 10:47 AM See sig for rig specs. I bought this rig when it was mildly built, so it had already been tinkered on when I got it. I just noticed it has no torque arm off the transmission to the skid. I know all manuals have one, should my auto? JohnC 09-06-2006, 05:07 PM ? Lubes 09-06-2006, 06:07 PM You mean some kind of mount?? The rear output of my 999 botls to a plate that then bolts to the skid plate as the third mount supporting the entire driveline... JohnC 09-07-2006, 09:01 AM You mean some kind of mount?? The rear output of my 999 botls to a plate that then bolts to the skid plate as the third mount supporting the entire driveline... I've got that same mount on the transmission you're talking about. Most manual transmissions also have an outrigger type mount that also mounts to the skidplate. mycj 09-07-2006, 03:56 PM Never seen one on an auto before. Don-T 09-08-2006, 06:23 AM My 87 with a 999 has one of those mounts with the snubber, but I do not know if it was original or added. littlejohn 09-08-2006, 07:21 AM The CJs and YJs had them, the mount changed when the TJ was introduced. Cheepin 09-08-2006, 05:24 PM My '80 CJ had one before I changed to a flat skid.IF I remember right 4wheel Hardware sells bushings for these and may have the rod also. cj8berry 09-08-2006, 05:58 PM The CJs and YJs had them, the mount changed when the TJ was introduced. tj 's dont have the snubber/tourque arm that the cj and yj's had. JrP 09-09-2006, 07:25 PM My 92 has one. sand dune coon 09-10-2006, 02:22 AM anyone have any problems with the stud sticking down lower than the skid? i ripped mine off on a rock.. | |