|
Fordman500 09-07-2006, 07:43 PM I am planning on putting discs on my Sterling. I have got the rotors but do these slide on over the hub or do they need to be pressed in behing the hub? It looks to me like they need to be pressed in behing the hub, because mine dont clear all the way when going over the hub. Anyone have any suggestions? Ill get some pics too. low_range 09-07-2006, 08:01 PM Plug Ugly covered this over on FSB. Everything you need to know should be in there http://fullsizebronco.com/forum/showthread.php?t=72090 Fordman500 09-07-2006, 08:32 PM Yeah alot of the problems I have thought of he covered it all. Thanks man, looks like I need to get some van rotors now. plug ugly 09-07-2006, 10:01 PM there are a few different write ups in the TOTM thread in this forum, just scroll down to the sterling disc swap link roctaco 09-10-2006, 12:13 PM A little off topic, but can someone tell me if the sterling is 8x170mm or 8x6.5 lug pattern. 'preciate it. plug ugly 09-10-2006, 12:48 PM depends on the year. The newer ones are metric, circa 98 I think u2slow 09-10-2006, 04:27 PM A little off topic, but can someone tell me if the sterling is 8x170mm or 8x6.5 lug pattern. 'preciate it. The metric pattern ones are already disc. | |