Ok so im half way through my SAS and my EB rear 9"s pinion is slightly offset compared to my 8.8 was. so the driveshaft is going to contact the stock tank. I figured this was a good time to remove the stock tank, as it kills my breakover and will be a rockanchor anyways. im looking ot keep all of the stock fuel system (pump and emissions stuff). Is there another ford tank that is more compact and more apt to be mounted on top of the frame behind the cab?

http://img.photobucket.com/albums/v69/redranger4.0/P7250158.jpg

that how the bed area is staying so i have no problems with room back there

You could probably use a between the rails rear tank from a chassis cab truck. I'm not sure exactly what they came in, possibly vans too.

Use a B2 tanks. Then you can put it behind the axle

dont think i want to go behind the axle as i will be trimming the frame up there later. behind the cab it will be more protected also

Use a B2 tanks. Then you can put it behind the axle


does the b2 tank have a drop in pump assembly? with the screw type top? i was hoping for something i could just drop my pump and shit in :D , i dont think im going to find something like that.

Here are some threads with info on the swap.:D

http://www.explorerforum.com/forums/showthread.php?t=152216&highlight=tank+Bronco

http://www.explorerforum.com/forums/showthread.php?t=125858&page=21&pp=20&highlight=tank+Bronco