I remember awhile back I read a good writeup on doing something with the steering box spring to help get more pressure or something out of a kick PS setup. I can't find the writeup for the life of me. does anyone recall where I can find it?

http://bbs.zuwharrie.com/content?topic=19886.0;all

Not much of a write up, but you should be able to figure it out.
There is a link in there to a picture back on Pirate that helps, so make sure you look at that.

That was all I could ever find when I was looking for the same info.

Thank you so much, thats the post I saw before too. I used the search buttons all over and just couldn't find it. thanks again.

if you are gonnamake the effort to shim the spring, drill out the passage 1/64 - 1/32 to get more flow too.