i am selling a 1.6L 16V with the harness and ecm if anyone is interested.

i figured i woud post it here because this is the only group that would be interested in it :flipoff2: flame me if you must :(

http://www.pirate4x4.com/forum/showthread.php?t=510443

Too far for me. :(

I used to want one bad, but now I'm going for the chevy 4.3

I would like to purchase it.

I would like to purchase it.


pm me and we can talk about it :D

This isn't Suzuki Extreme Rockcrawling Tech.

This (http://www.pirate4x4.com/forum/forumdisplay.php?s=&daysprune=10&f=33) is the forum in which this thread belongs.

i figured i woud post it here because this is the only group that would be interested in it :flipoff2: flame me if you must :(


OK, you suck at the internet :flipoff2:

If it dosen't sell soon, get a hold of Billy Bob, he was looking for one for his tracker he's trying to build as a family wheeler!

This isn't Suzuki Extreme Rockcrawling Tech.

This (http://www.pirate4x4.com/forum/forumdisplay.php?s=&daysprune=10&f=33) is the forum in which this thread belongs.

then heres some tech :flipoff2:

the adjustable cam gear has the most noticable low end torque increase at 7 degrees advanced :shaking:

Yea it may not be in the "right" spot, but its a good place to post it since it IS a very sought after motor for samurai's. Post a few pics or other specs, milage, condition, parts included, ect... then its tech :flipoff2:

If I could afford it I would p.m. you on it.

This isn't Suzuki Extreme Rockcrawling Tech.


95% of the threads here aren't anymore.......So what's one more..... :flipoff2:

Michigan, huh? That's a bit too far for me, too.

Too bad.

i have had a few people ask me about shipping to the other side of the country, does anyone know the most cost effective way to do it? i can put it on a pallet but im worried about something bumping it in the truck or something like that.....

anyone have experience in this sort of thing?

Strap it down to the pallet well and then put several layers of cardboard around it followed with stretch wrap.

Ship it via yellow/roadway. Probably cost between 200-400 depending on distance and they will take care of it. Wrap it in stretchwrap and put a "DO NOT STACK" label on each side and a "DO NOT REMOVE STRETCH WRAP" sign on it.

Go to a pak mail or some sort of packing place to ship it. They receive a 80% discount when shipping stuff. If you ask for a liftgate delivery or pickup it cost an extra $100. The shipping places usually get the liftgate pickup for free.

Check your PMs JJ

Pm box is full. JJ