how do I get the injectors to go back into a fuel rail on a YJ? Do I need to replace the little donut seals on the injectors? Do I put the seals on the injectors then push them into the rail or what?

Thanks for the help on this

Put the injectors into the rail first then push the whole rail assy into the intake, (hint: smear some vaseline on the o rings before you try to push them in)

make sure you push them all in straight when putting them in the intake. The o ring can get pinched if it goes in crooked and it wont seal up right. The vaseline trick works really well.

thanks for the vaseline idea. runs good now.

KY works too. What ever is handy in the shop :laughing: