I need some advice on these springs. I debating to use the 44044 waggy style which would move the axle 2" forward and use them all around on my YJ or get regular Alcans,I will use a 2" lift. Will the 44s cause problems with my steering linkages, and will they control axle wrap from a 112.1 ratio, My friend is using the Alcans and axle wrap is controlled fairly well.

Well I would strongly suggest some type of anti-wrap bar on any SOA setup no matter which springs you use...Just my $.02:D

I would check prices and see what your willing to spend. 44044's are expensive for off the shelf springs, I run BDS YJ springs of at least the same quality and they cost $150 for the pair, to bad they don't offer some direct compitition for 44044's.

Originally posted by NE-RokToy
I run BDS YJ springs of at least the same quality and they cost $150 for the pair, to bad they don't offer some direct compitition for 44044's.

I agree with that one. The only Waggie springs BDS carries are 4" lift! :eek: That's a bit much with SOA and the fact that stock Waggie springs are already 2" over CJ springs. It would be great if BDS had a 2" Waggie spring.

Originally posted by cmegoup


I agree with that one. The only Waggie springs BDS carries are 4" lift! :eek: That's a bit much with SOA and the fact that stock Waggie springs are already 2" over CJ springs. It would be great if BDS had a 2" Waggie spring.
4" BDS waggys sua would probably be like 6". I wish someone would try it before me :D

i have had no problems with my 44044s. never had the need to ask about alcans..........................ask this on the toyota board. no V-8s , maybe you'll get some other guy who has a rig nothing like yours to give you some advice.................. :p