|
High5 05-01-2002, 03:12 AM i have seen info on swapping a gm tbi setup onto a 304 before so i know it can be done but i don't remember where i found the info. does anyone have a link with info like this? a buddy of mine wants to do this to his amc 401. i do remember that it says to get the setup from a motor similar in size so i guess with a 401 he could either go 454 or 350. the 350's are easier to find. any info would be helpful. High5 05-01-2002, 03:13 AM this might be a good topic of the week if anyone knows much about it. also what are your thoughts on propane? Mo 05-01-2002, 03:18 AM This is an upcoming topic of the week. But that shouldn't stop you from discussing it now. :D That said, some great info can be found here: http://www.customefis.com Eric Ruhl 05-01-2002, 07:06 AM You can see my comments here: http://www.pirate4x4.com/forum/showthread.php?s=&threadid=51190 High5 05-01-2002, 05:16 PM thanks for all the info!!!! Ztec 05-01-2002, 06:51 PM goto www.ifsja.org and search for tpiguys posts you will find alot of info he converts tbis and tpis to amc intakes | |