cbra212
10-10-2006, 12:31 PM
I have a complete 9" out of a 76 bronco (57" total width) under a 83 cj7. 31 spline axles, detroit locker, 4.56 gear, all new bearings & seals throughout. Also have a d30 front with 4.56, detroit locker, yukon 4340 axles 760 joints, new calipers, rotors, spindles bolth are spring under ready to bolt up u-bolt yokes. less than 1000 miles on both. 800 for the 9". 700 for the d30. I also have the 1 1/2 spider trax spacers to correct the difference in width that go with the d30. I can be reached by email or phone at 601-880-1388 in MS.
broncoboy351
10-10-2006, 03:28 PM
I'll give you $800 shipped to my door for the 9"
My zip is 95060 thats santa cruz ca
cbra212
10-11-2006, 06:06 AM
Ill have to see what shipping cost. Ill check when I get back to the house.
igocommando
10-13-2006, 08:18 PM
How wide are your axles? (wms) pm me please
Thanks
mike0914nascar
10-24-2006, 07:07 PM
Would you be able to ship to calif 93225 if so how much.Also is the yoke offset to one side a little.I thought it was not sure.Thanks!
cbra212
10-25-2006, 06:11 AM
It can be shipped to CA. The yoke is offset a little. Dont know exactly how much. (1" or so)
mike0914nascar
10-26-2006, 09:03 PM
Does this axle have the large bearing housing.I read that the housing out of that year was origanal with 27 spline and small bearing housing.
cbra212
10-28-2006, 08:52 PM
I wouldnt use that source for anything else. 75-77 were all big bearing 31 spline from ford. The best 9" on the planet as far as build is concerned. These were the ones they tested under 67-68 camaros up to 1000 hp. (stock rears) same width as factory camaro rears.
MudDawg2
10-29-2006, 05:36 AM
Why are you selling these? Would you be interested in a partial trade deal?
cbra212
10-29-2006, 12:51 PM
Going to 60's. Possibly, what do have in mind??
MudDawg2
10-30-2006, 04:17 PM
I have a 14bolt FF and D44 out of a 73 chevy. The D44 needs some work and the 14bolt (4:10 open), I currently have the hubs off it. I was going to do a disc brake conversion. Both axles are cleaned and painted with por 15. Have you found any 60's yet?
cbra212
10-30-2006, 06:52 PM
The place doing all the work has the 60s. All low mileage and locked up w/513 gears. Im looking for tires and beadlocks at the moment.
cbra212
11-01-2006, 02:38 PM
Birmingham. Off Road Connection.
SWOhioJeepDude
11-02-2006, 05:21 AM
Would that be 5 on 5.5 lug pattern also? Know anyone that travels up to or other shipping ideas to SW Ohio?