|
Folke 10-19-2001, 03:27 PM Where the yokes enter the transfer case (Atlas 3.8) there are only rubber seals preventing the dirt from entering. Since I mostly do mud I'd like to add some kind of slinger between the yoke and the 'case. Does anyone have a tip where to find such things? TIA /F. 66CJdean 10-19-2001, 04:19 PM Does your yoke have the spot turned down on it for the slinger to go on? Some yokes have them and others dont. Waht about tack welding on a homemade sheet metal one? BillaVista 10-19-2001, 09:11 PM They can be ordered from a Spicer dealer. I have a couple of pages out of the Spicer driveline catologue, and they often list 3 parts...yoke, slinger, and yoke with slinger. Not all 3 are always available for every size. They give very precise dimensions too. A look through the book should find you something that will work, but as mentioned, you may have to replace the yoke too, or have it turned down. Folke 10-19-2001, 11:09 PM Thanks guys, The yokes are turned down, so I'll look into Bill's suggestion. Let's hope I can find a dealer over here... Thanks! /F. | |