This is from another forum, but thought you guys may be interested in it. Blitzkrieg 2wd replacement Hub Upgrade (http://dezertrangers.com/cgi-bin/ib/ikonboard.cgi?;act=ST;f=1;t=44655).

Here are the specs:

The hub kit will replace the weak unit bearing system with a more conventional tapered roller bearing assembly. These hubs are built in house and will retail for $950 complete and ready to install. Features will include the following.....

-Heat Treated 4130 Snout based on a Dana 44 4wd snout

-Wheel mounting surface is located between two 1.625 ID Timken bearings.

-Utilizes the stock rotor and caliper(Wheel mount surface is exactly in the same location as stock)

-No wheel modifications necessary-most aftermarket center caps will fit as well.

-Works with stock and all aftermarket cast and fabricated spindles.

Pics.......

http://img249.imageshack.us/img249/1759/newhub010kk9.jpg

http://img273.imageshack.us/img273/2873/newhub016vx2.jpg

http://img176.imageshack.us/img176/6287/newhub001ul3.jpg

The website has more infoBlitzkrieg Motorsports (http://www.bmsoffroad.com)