1982 Chevy Blazer
6.2 L Diesel with Banks Turbo
3" straight exhaust
TH 400 / NP 205
14 bolt SF rear, welded, 4.10:1
10 bolt 8 lug front, open, 4.10:1
ORD crosssover steering
ORD weld-on steering brace
6" Pro Comp lift (springs in front, blocks and add-a-leafs in rear)
ORD zero rates in front
36x13x16 Super Swamper TSL's
Bushwacker cut-out fender flares
CD player
Power windows (all work)
Transmission temp, exhaust temp, and boost gauges
Full-size spare
Snow chains for 36" tire (made from chains from road grader)
$4,000/OBO
Located in Auberry, CA

This has been sitting in my parents driveway for the past year, so it's time to go. I put 2 new batteries in it last weekend and it fired right up. Since I bought it I have put a fresh motor in it, rebuilt the turbo, installed the lift, added 3/4 ton running gear, and gave it a fresh paint job. The transmission has less than 5,000 miles on a rebuild. The seals and gaskets have been replaced in the NP205 and it has been modified for twin stick. All it needs is the levers.
The A/C has been converted to R134A, but it needs to be re-charged. The carpet has been removed and replaced with rubber flooring. The stock seats are in good condition and have seat covers.

Extras include:
14 bolt FF rear
Half doors
Components for hydraulic assist steering (all you need are the mounts and hoses)
Black tube steps
3" exhaust with Flowmaster muffler

Both rear quarter panels have been dented (hit & run/ trailer) and the fender flares are rashed (following a Toyota down a trail). I can provide close-up pics of all the damage. The transmission pan also leaks where the transmission temp sensor penetrates. The windshield also has a small crack in it, so it will need to be replaced eventually.

You can reach me at (559)240-0329 after 5pm


http://i76.photobucket.com/albums/j26/matt1142/IMG_0323Medium.jpg
http://i76.photobucket.com/albums/j26/matt1142/IMG_0326Medium.jpg
http://i76.photobucket.com/albums/j26/matt1142/IMG_0330Medium.jpg
http://i76.photobucket.com/albums/j26/matt1142/IMG_0334Medium.jpg
http://i76.photobucket.com/albums/j26/matt1142/IMG_0331Medium.jpg
http://i76.photobucket.com/albums/j26/matt1142/IMG_0337Medium.jpg
http://i76.photobucket.com/albums/j26/matt1142/IMG_0344Medium.jpg

Bump

ttt

any idea what the hp rating for the banks kit puts out?

Was that rig ever in san luis obispo??? Looks familiar

Was that rig ever in san luis obispo??? Looks familiar

Yep. It was there while I was going to Cal Poly.

any idea what the hp rating for the banks kit puts out?

I've read that it's a 60 plus HP increase and 115 lb-ft of torque. It definitely is a big improvement over stock.

ttt

bump

Bump for a super clean rig. I've seen this thing in action, don't pass this up this great deal!

ttt for the weekend

bump

:bounce2:

:bounce:

Still for sale. I know someone needs a winter project.

ttt

Somebody make me an offer

ttt

I am really interested it and was wondering if we could work out a way that I could get it but I'm stationed in kuwait until next month that would be great if you could

I'm sure we can work something out. What did you have in mind?

i could have a friend of mine right you out a check for a down payment and get it mailed to you then give you the rest in cash when i get back to cali and i was wondering how far from LA you are

That would work. Auberry is about 4 or 5 hours from LA (it's northeast of Fresno, up in the mountains). Do you have a way to trailer it back? If not I can pay up the registration.

how much would you like for a down payment and i need your address to send the check to. i dont have any way to trailer it down if you could up date the tags that would be awesome

You have a pm