|
bent70 05-02-2002, 04:29 PM I am putting in a 60 with avalanches high steer arms and moving my axle 2"-4" forward. Can I have pics of others rigs with high steer and the clearence from the pitman arm and tierod? I will post pics later tonight of mine and would like your opinions on it. yjtj 05-02-2002, 06:03 PM i have a d60 with the ave arms and rods,dont know if you want to see it bent70 05-02-2002, 06:25 PM sure I wouldn't mind the pics. I just am not sure if I will have to move my steering box forward or not extend my wheel base. I'll have pics later going to go work in it now. bent70 05-03-2002, 12:16 AM the pics with the sterring arms are without and springs in but the ride height is the same. pics (http://photos.yahoo.com/scottsbent70) yjtj 05-03-2002, 12:20 AM wont work for me bent70 05-03-2002, 12:23 AM I inserted the hyperlink backwards works now:rolleyes: yjtj 05-03-2002, 12:57 AM looks like you may be able to run the draglink to the passenger side in like the 3rd hole from the knuckle and then run the tie rod in the hole closest to the knuckle. you could also get/make a shorter pitman arm. you may have to chop the arms down also once you have picked your holes for frame clearance. that all just a guess from your pics though found my old post with pics http://www.pirate4x4.com/forum/showthread.php?s=&threadid=5942 | |