Front and rear waggy dana 44's ready to bolt in your spring over yj.

Here are the specs...

4.56 gears. Detroits front and rear. Yukon alloys shafts in the front with longfield u-joints. Factory waggy drive flanges and I will include a set of locking hubs too. Sky Manufacturing high steer arms with 1.5 DOM (1/4 wall) drag link and tie rod with 1 ton tre's. I will also include the front driveshaft that I am currently running (double cardan style)along with the u-bolts, spring plates and a spare set of stock front axle shafts.

The front brakes are in good shape, were replaced about a year ago, as well as the balljoints. I will be leaving the hard brake lines on the rear axle along with the traction bar mount.

The axles are set up for SOA on 1.5 RE springs, and the knuckles have been rotated.

For a SOA application all you would have to do is ream out the pitman arm and bolt it all together.

I would like to get $2700 for it all and they will be pulled out of my yj after the 12th of November.

I am willing to strap them to a pallet for shipping. Shipping zip 21074

Brandon

bump for ya.

these did great at tellico

whats the wms? passenger drop right? pics please to airmaher@yahoo.com
-Pat

drivers drop

front is 61.5"
rear is 59"

Will you separate? I'm interested in the front.

Assume these are low pinion?

Will you separate? I'm interested in the front.

I may be interested in selling the front if I can find someone interested in the rear.

cazs_98, yes they are low pinion

I am also willing to take partial trades. Looking for an atlas 3.8, 4.3, or 5.0 (23 spline YJ) or hydro steering components, 39 krawlers, 39 iroks or 42 iroks in good shape

BTT

bump

Bump

bump

$2500

ttt

wish i had the money

Bump