i have a 95 yj with a plastic cluch master cylinder and plastic line
i am doing a tranny swap
but the new slave cylinder takes a steal line:confused:


is there any master cylinders with a steal line that will bolt up to my fire wall with little or no mods to it:question:


motor is a 4.0



you guys are:cool2:

You might check on one for an older ('87 - '89) YJ with a 258/manual. They had the Peugeot BA 10/5 tranny and used a NABCO steel master cylinder. I wouldn't be surprised if it bolted right to the firewall...

Good luck,
Jake

Yes my 89 Jeep has the steel line coming from the Master. It's a bit shorter in length but it should work just fine. I think you might have to drill new bolt holes to get it to line up.