What are you using for exhaust on a 401 in a yj? Installed my advanced adapter mounts, have a set of cj headers but they interfere with the mounts.
Just looking for someone who has found something that works well with this application. I guess the other option is cut out a couple of tubes and rebuild the headers.

thanks in advance
k

I'll throw in a vote for edelbrocks amc headers they are top notch and I would be very surprised if they interfered with anything on a YJ.

I bit on the spendy side but well worth it in my opinion.

I went through this exact dilemma about a month ago. I tried a header for a Grand Wagoneer, would not work, hit my hydraulic slave cylinder, tried CJ headers, hit the motor mounts, tried FSJ headers, hit the frame. I just gave up and used cast Iron manifolds from a 71 AMX. If your not using a hydraulic clutch the Wagoneer headers might work. Also Doug Thorley makes some really nice headers for a Wagoneer that might work. Let me know what you end up doing.

i am running waggoneer headers in mine.. but i do not have a hydraulic cluctch or those engine mounts... i am sure you can get a manifold in there and if so then those edelbrock headers will work.. my friend has them on his waggy.. they are very nice..

What are you using for exhaust on a 401 in a yj? Installed my advanced adapter mounts, have a set of cj headers but they interfere with the mounts.
Just looking for someone who has found something that works well with this application. I guess the other option is cut out a couple of tubes and rebuild the headers.

thanks in advance
k
Another question, you gona run on pump gas or going propane? I know gas up there aint cheep and a 401 sure does drink!!!