|
eg68 05-05-2002, 07:18 PM is the relay that is built into the fuse block on the universal harness a electric fan relay, or do I need to wire in a seperate relay for the fan? There are wires for a fan switch and a wire for the battery positive lead to the relay, and there is power to those wires, The Jerk 05-05-2002, 07:26 PM should bt in the fuse block itself, i have the same one although im not runnin gmy fan through the system. it will be on its own set up. jiMMy The Jerk 05-05-2002, 07:33 PM do you happen to have the race/street 12 circuit harness? if so do you have a scanner? i need the manual again. mine got lost! jiMMy eg68 05-05-2002, 08:21 PM yeah I do, but it may be easier to go here... http://www.painlessperformance.com/manuals/90501m/90501mhome.htm (http://) they have the manual online eg68 05-05-2002, 08:22 PM try that again.. http://www.painlessperformance.com/manuals/90501m/90501mhome.htm The Jerk 05-05-2002, 08:24 PM <------ retard. thanks man! jiMMy Jaffer 05-06-2002, 08:08 PM I recall that it is just a simple circuit. Note there is no 'heater fan' circuit and this is how it is commonly used. Isn't it the horn relay that you are refering to? | |