I have the early Edelbrock performer camshaft in my small block Chev engine. I am changing to the OEM TBI heads/manifold/computer etc. Is this camshaft compatible with the TBI set up? They do sell a different grind cam for their performer TBI manifold, but i don't know about the stock manifold. I'm running the regular hyd. lifters.
I only want to tear it down once!

I've had no response from the chevy board

Thanks,
David:usa:

Which Edelbrock performer cam are you running? I think they make a couple of differrent ones.

It is the 2102 cam specs below:



Performer-Plus Camshaft/Lifters/Lube Package #2102
Use Edelbrock #7800 or #7802 timing set or #7890 gear drive. DO NOT use stock set.

Duration at .006 Lift: Intake 278° Exhaust 288° Centerlines
Duration at .050 Lift: Intake 204° Exhaust 214° Lobe Separation: 112°
Lift at Cam: Intake .280 Exhaust .295 Intake Centerline: 107°
Lift at Valve: Intake .420 Exhaust .442
Timing at .050 Lift: Open Close
Intake 5° ATDC 29° ABDC
Exhaust 44° BBDC 10° BTDC