|
gotpropane350 11-27-2006, 04:54 PM looking for help on a rear steer setup for a D60 ?any of u hardcore wheelers know of a good source of pics and parts information?!? chris demartini 11-27-2006, 05:01 PM front 60 inner c's on the tubes hydro ram of your choice custom shafts of your choice You're going to run into more trouble with the wide frame and body, building the axle and steering it is the easy part. Schmozilla 11-27-2006, 05:06 PM Narrow the frame first... http://www.geocities.com/cjames63/frame4.JPG http://www.geocities.com/cjames63/frame5.JPG http://www.geocities.com/cjames63/frame6.JPG Get to work :flipoff2: gotpropane350 11-27-2006, 05:15 PM will i be able to do this setup with my ford 60 high pinion that i already have? 87JeepWrangler 11-27-2006, 05:40 PM i'd consider using one of the aftermarket knuckles tho. the ford versions seem to be the weekest of the 3 types of 60 knuckles. as a rear axle, those knuckles are gonna take a beating. tjmark 11-27-2006, 06:10 PM I have the combo and i narrowed the frame,coilovers,recentered hp 60. There are pics on jeepaholics. I origonally kept the old frame and coils but limited the turning radius. I lost my red star and don't play on the net anymore or i'd post pics. 99grandtj 11-27-2006, 07:00 PM I have the combo and i narrowed the frame,coilovers,recentered hp 60. There are pics on jeepaholics. I origonally kept the old frame and coils but limited the turning radius. I lost my red star and don't play on the net anymore or i'd post pics. What's your wheel base at? gotpropane350 11-27-2006, 08:18 PM i havent decided on the wheelbase yet .... i had 60's front and rear but they were near stock width ....now im going with full width 60's.....im def gonna stretch it prolly to right around 108"......i just need more info on setting up the knuckles for the rear... i just havent seen any real good pics:shaking: tjmark 11-28-2006, 12:28 PM What's your wheel base at? 106" tjmark 11-28-2006, 06:13 PM i havent decided on the wheelbase yet .... i had 60's front and rear but they were near stock width ....now im going with full width 60's.....im def gonna stretch it prolly to right around 108"......i just need more info on setting up the knuckles for the rear... i just havent seen any real good pics:shaking: I made my axles 65 WMS. the rear can B set at what ever caster you want. I set mine at 0. had them at 5DEG before. never noticed any diffrence. gotpropane350 11-29-2006, 02:42 PM how much should the frame be narrowed in the rear?!? B.A.R.K 11-29-2006, 08:16 PM I have the combo and i narrowed the frame,coilovers,recentered hp 60. There are pics on jeepaholics. I origonally kept the old frame and coils but limited the turning radius. I lost my red star and don't play on the net anymore or i'd post pics. I didnt have any luck finding the pics that you are speaking of. Anyone care to help? Schmozilla 11-29-2006, 10:14 PM how much should the frame be narrowed in the rear?!? I narrowed mine 5 inches, so that it is even with the inner fender in the rear... tjmark 11-30-2006, 05:59 AM http://www.jeepaholics.com/support/topic.asp?TOPIC_ID=51911 http://www.jeepaholics.com/support/topic.asp?TOPIC_ID=32538&SearchTerms=rear,stear Here are the old pics with fenders | |