|
Rookie 05-08-2002, 10:15 PM Last wheeling trip, I sunk my Jeep in a puddle (kinda deep). The water was deep enough to submerge my ARB compressor. As soon as that happened, my problems developed. First, the compressor will not shut off. Second, when I engage the front locker, it leaks from where the air is released when you disengage the locker. Any ideas of what is wrong??? TIA Rookie The Jerk 05-08-2002, 10:18 PM Originally posted by Rookie Last wheeling trip, I sunk my Jeep in a puddle (kinda deep). The water was deep enough to submerge my ARB compressor. As soon as that happened, my problems developed. First, the compressor will not shut off. Second, when I engage the front locker, it leaks from where the air is released when you disengage the locker. Any ideas of what is wrong??? TIA Rookie "The water was deep enough to submerge my ARB compressor. " <---- generally not good. might need to disasemble and clean. jIMMy Rookie 05-08-2002, 10:22 PM I took the tank off and drained it, and I also cleaned the connectors. Anything else I should clean, disassemble? The Jerk 05-08-2002, 10:24 PM might take the soilinoid(sp?) off where the line enters teh compressor and clean that and re seal with new thread tape or soemthing. im sure you can get teh cover off th motor somehow and clean out with an air gun . jiMMy SLO_Crawlers 05-08-2002, 10:31 PM The relay might have gone bad. My compressor wasn't working and I tracked the problem down to the relay. It was like $10 from the auto parts. Good luck. D60 05-09-2002, 06:56 AM Originally posted by Rookie Second, when I engage the front locker, it leaks from where the air is released when you disengage the locker. Any ideas of what is wrong??? Solenoid... Aggro 05-09-2002, 06:58 AM Water in ARB?? If it was in the compressor, it's likely now in your locker. | |