I’m about to rebuild my car from scratch
Due to my country laws I cant go spring over or to put wheels larger then 31
After bribing few people I’ve got the permission to put 33 and I’ll probably not be able to go over 35
With these tires do I need to put axels that are stronger then D44 rear and front?
I’m also planning on spool them both
Any suggestions
Omer

Well Omer,

Depending on your drivetrain and gear ratios, Dana 44s will probably be plenty strong. If you have a lot of torque and/or really low gears you might wanna reconsider.

Glad to hear you're bribing officials for good reasons ;) :D

HTH,
Jake

I'd say you'd be fine, expecially with all the new high dollar shafts and u-joints you can get for them now. One thought though, spooled front and rear will probably require hydro-assist steering, or the ability to disengage the front (ie 2-low) to be able to turn with any ease

Chad

At first I wanted to put international axels
But today I found a J20 at a low price so I’ll take its axels
I still don’t knew the gear ratio in them but I’ll be running on 700R4 transmission and D300 T case
Attached to cid 350 engine
:blender:
omer