does anyone know if or were to find a cutting tool for the mill or the lathe to cut countersink washers like this http://www.camburg.com/images/fabricationParts/Fenderwasherkit.jpg

If i can't find one I will just make one.

Mcmaster Carr sells beveled finish washers...steel though and $3 ea...but cheaper than Camburg $6 ea ($60 for 10) but that includes hardware. If you have a lot of time on your hands I guess you could machine each one, but unless you have a cnc lathe....good luch with that, I hope you only need a few of them.

Shape Countersunk
For Screw Size 1/4"
Material Type Steel
Finish Black
Countersunk Shape Socket Screw Countersunk
System of Measurement Inch
Minimum Thickness Range .16" (5/32") to .299" (19/64")
Minimum Thickness .16" (5/32") to .299" (19/64") .281" (9/32")
Minimum Thickness .281" (9/32")
Application Finishing Washer
Specifications Met Not Rated

Outside Diameter Range
1" to 1.499" (1-31/64") | 1.5" (1-1/2") to 2.49" (2-31/64")


These 5 products match your selections
Outside Diameter
1.25" (1-1/4") 92908A155 $3.00 per Pack of 1

1.375" (1-3/8") 92908A160 3.40 per Pack of 1

1.5" (1-1/2") 92908A165 3.68 per Pack of 1

1.75" (1-3/4") 92908A170 5.03 per Pack of 1

2" 92908A175 8.03 per Pack of 1