i need the distance between the backing plate mounts on 14 bolt pu axle - it is 67 " wms - ( my mock up axle is from a DRW and is wasted ) havent picked up the new axle yet ( have it - just 70 miles away ) - need to make my lower link angle mounts at the frame - thanks ( and i looked at the 14 bolt bib. already )
Posted in the general section and got 25 veiws - with no info :confused:

maybe the chevy section? Not many of us ford guys have chevy stuff laying aroun to just measure :flipoff2:

get a d70 the 14ff is an anchor

there is nothing wrong with a 14B, or a 70.

im using the 14 bolt because i have it - ( 3 to be exact ) one has 4.56 gears and a detroit - but the tubes are bent -bad - ( rollover at 85 + ) - then a motorhome dull. but the spindles are f#%ked - then a 78 with 60K original - never off road - i'm going to pop its cherry - :grinpimp:

yeah there is something wrong with 14ff, 2 somethings
the housing is made with a large wall stuck to the bottom
chevy guys will lord about you having a chev part on your ford

All depends on what year the 14 bolt is out of and if it was in a 3/4 ton truck or a 1-ton truck.

My best educated guess is ~51"