Will 15 inch wheels work on a 14-bolt disk brake conversion using eldorado calipers? If so what size is best 15x8 or 15x10 with 3.5 backspace?

I used 15x10 with 2.5" backspaced black steel wheels (PCW moster mods) on my 14-bolt with 3/4 ton front calipers. the have plenty of room between them.

3.5 will scrubbbbbbbbb. You would have to add a spacer or grind some. I used 2.5 as well with no problems. But bought a set of used wheels with 3.5 and had to use a wheel spacer. http://www.imagestation.com/picture/sraid209/pcbe923390a3d7e48f0ad732dcc9b9f44/ee0a4b41.jpg

I used 15x10 with 2.5" backspaced black steel wheels (PCW moster mods) on my 14-bolt with 3/4 ton front calipers. the have plenty of room between them.

Thanks, I believe I will be using the same wheels as you.

What type of calipers are you running on your front 60? How much grinding needed with 2.5 bs? I will be using a 78 ford 60.

Thanks, I believe I will be using the same wheels as you.

What type of calipers are you running on your front 60? How much grinding needed with 2.5 bs? I will be using a 78 ford 60.

Factory '85 ford calipers. Tires aren't on the 60 yet (still building). Front may need a little cutting. 14 bolt is done sitting on the new rubber with plenty of clearence at the brakes.

What are you running for the cables on the eldorado calipers for the
emergancy brake?

I was going to try stock Cadillac e-brake cables from the junk yard. http://www.mindspring.com/~jayk3/toyota/discs.htm

I have decided to go with a transfercase e-brake instead.