Thought this might help as I could only find 00Pumpkin, and some BTF project vehicles with these frame rails. Might help people in the future!!

http://i52.photobucket.com/albums/g16/GiS5_bucket/P1010326.jpg

I notched the rear body section, but i think I am just going to cut off the smaller section outside the frame...make some more room for the fishplate.


http://i52.photobucket.com/albums/g16/GiS5_bucket/P1010327.jpg

Time to mock up the rear links I guess. Rear frame/bumper is 35" wide.

http://i52.photobucket.com/albums/g16/GiS5_bucket/P1010328.jpg

Do you have a pic or two of the front where it attaches to the frame? This will be useful in a few weeks, Thanks

Sorry it took me so long grand!!

http://i52.photobucket.com/albums/g16/GiS5_bucket/P1010343.jpg

Same on inside of frame rail,

One word of advice, this kit is set-up so that someone with a 3" body lift does not have to notch the back of their tub. I have a 1" body lift so had to notch some of the tub (no problem), as well as cut the poly body mounts down.

Thanks, :beer: :beer: