Where the hell is your filler neck at?

I'm keeping my stock tank and I don't know where to stick the filler neck.

normally if you comp cut the rear you move the gas tank or either run a fuel cell. im sure you are going to be moving the axle back. if this is the case, then its best to go ahead and move the tank. INMO. you can still use your stock tank if you have no need for a back seat.

I'm only moving the axle back 4" to bring wheel base to about 98". I don't need anymore WB for the trails I do.
I don't think I'm going to need to move the tank if I'm only moving the axle back that far.

Relocating it inside is a no for me. I need the room inside for my gear and they won't give me a validation sticker if it's inside.

if you are only moving it back 4 inches then why bother comp cutting it? you can cut the fender wells and make it look really clean and still have enough room for a 4 inch stretch. i think that comp cut will give u a lot of unused fender space but that is just my opinion!

I'm comp cutting it to pretty much get rid of the Renegade kit on it and put on BTF's Comp Corners.