June 02 issue, pg 35:

"You can also use spring bushings inside 1 1/2-inch, 0.120-wall tubing if you don't like rod ends."

Anybody know what application Hazel is speaking of for the bushings?

Thanks all,
JYS

I think thats a Jeep YJ.

pretty sure that it is the LARGE YJ ones..the smaller ones are 1.25ID for sure

I know that the small bushings for 2.5 in YJ's fit inside 1.5 in.x.095 tube

I'll look when I get home, but I bought tube to use with Scout II bushings.

Joe

It is the smaller ones. They are roughly 1.25" overall diameter. They fit in 1.5" 0.120 wall tubing which has an inner diameter of 1.260". The looseness of the 0.010 is eliminated when the steel bushings are hammered in and cuse them to expand.