I traided a guy some spring purches for a York 210 compressor. I would like to mount it in my sami with 1.3l.

Anyone done this? I am hoping someone has some pics and or advise.

How 'bout it, anyone done this?

try the little SEARCH button

And, if you tried it, you'd find nothing.

Nada. No information about the 1.3 and a york being posted.

Besides, i've got the same thing, and I'm trying to figure how to do it - or use an sanden compressor.

Kilby enterprises offers info on the york that it can be mounted at an angle try a custom pulley and mount it above the alt or better yet try it on the exhaust side of the motor, if toy p.s. try low mount p.s. with high mount air comp. where the idler would be (toy p.s.) Petroworks offers a toy p.s. bracket for cars w a/c, which is what you will need. a 10 cu" york will put out about 14 cfm and not need a tank to most any thing this side of a large sand blaster!!!!!!!!! do you have enough ponies????????

Ya, I hope it doesn't stall my poor little 1.3l whem I flip the switch to energize the clutch:D

Viair (sp?) makes a starter motor powered version that retails for about 700.00 new and weighs @48lbs and uses four guage cable hard wired to the battery!!!!!!my home compressor is@ 4.5 hp and starts with @ 20 amps ac.(kills my 4000 watt generator DEAD!!!!!!!!!)AND RUNS ON ABOUT 15 AMPS(@14CFM @90 PSI)