i fould a 91 hp dana 60 i was woundering if i run 39.5x13.50-20 what do i need for back spacing and will i run in to rubing problems with the springs being set out farther when i turn by the way i got a 02 chevy

In '02 Chevy made a lot of different cars....?

02' what :confused: 2500HD? I'd be interested too.

its a 02 chevy z71 i got about 12 inchs of lift now in the rear and still working on the front cause i can't find a 77 to 79 hp dana anyweres for a good price if i used a 91 dana 60 with 36.5 perches if runing the 13 inch wide tire if i was going to have rubbing problems and what backspacing should i use

wow. PUNCTUATE.

if I was if then if? and what should I do?

no it won't rub if you stick with standard backspacing. I used ORU's sas hangers and have 20x10 centerlines with 37-13.5/20 toyo mt's. my axle is a 88 kingpin 60 with 36.5 perches.

I was looking at ORU's website yesterday and it appears they don't offer the 36.5" kit anymore for the 01'+ HD's. Did I miss it or did they quit that kit?

Nice Burb BTW.

no it won't rub if you stick with standard backspacing. I used ORU's sas hangers and have 20x10 centerlines with 37-13.5/20 toyo mt's. my axle is a 88 kingpin 60 with 36.5 perches.

Do you happen to know the wheel backspacing? How much lift are you running?

no it won't rub if you stick with standard backspacing. I used ORU's sas hangers and have 20x10 centerlines with 37-13.5/20 toyo mt's. my axle is a 88 kingpin 60 with 36.5 perches.

How much lift are you running?