Well, its time to build a new rig and I need the money. Heres (http://www.uc4x4.com/forum/viewtopic.php?t=4) a link to a build up of my rig. Everything is going except the winch, Air Shox, motor, t-case, rims and the front fenders. Its got a full hydro SM465, 3-linked rear, 52s up front with 15" rancho shocks, also have another new pair. Heater worked great just need to hook it back up. AC worked great also. 2WD Steering box is welded to the frame. Crossover and hysteer. The knuckles and everything out is not included. If your interested in something just ask. 707-344-4203

what about the fuse block

The OEM one? Thats fair game too. So is the entire ECU for the TBI injection.

What Rancho Shocks do you have?
What are you asking for them?

They are 5000 Series, I can get the actualy part number when I get home from work today. The NEW ones I want $100 and $80 for the USED ones.

I'l have to pass.
I am looking for a pair of 9012s for the back of my rig

Well, the truck is getting tore apart today, so if your interested in something give me a call and come on by. 707-344-4203

those 52's Got any lift to them ?

nope, there stock with ORD zero rates under them.

Is the sm 465 original to that truck. Maybe interested if it isnt a 10 spline rear output style.

Nope, its a 10 spline...

Anybody else interested in anything?

i need a little more lift in my truck, are you selling those add-a-leaves? still got those rear springs? do you have longer shackles (front or rear)?

what's the # on the TBI computer?

also, how long are the new 5000s fully compressed and fully extended?

maybe we can work out a trade......

the rear springs are long gone, got cut up for a buggy leaf setup on a toyota. I still have the front leafs, there stock 52s. no longer shackles. i do have thos zero-rate add-a-leafs. PM me if your interested in any of it.

i will get the measure ments on the shocks later tonight, and where am i looking for the TBI number? If it helps at all, its all stock ECU for an '87 with a 350ci engine.

should have a white decal on the ecu itself with a bar code and some #s. the last 4 digits are what we're after.

any news?!

Is this thing still complete?

any news?!

Oh ya, I forgot. There is 16069941 and then there is 869941M710433878, and there is also a 4 digit letter thing, ACSW. I am not sure which one you needed but theres all of them

Fender: The truck is still together minus the Tranny and T-Case. Some guy wants my flat tops, so, I am not sure if you were still interested or what. Let me know.

Is the cage still intact/available? Thanks, Chris

Is the cage still intact/available? Thanks, Chris

Its still in the truck, the rear tubes are welded to the frame, but I have no problem cutting them off. There are some spots that still need welding and some chicken shit welds that my Ex girlfriend did. But I can pull the cage and weld everything up for you if your really interested. Wanna come take a look at it? PM me

Whats left? I would like to know.......cage, seats, springs, bumpers??

I hate to clog up your for sale add but I was going to ask you a tech question:shaking:

What are the specifics on the Fox Air shox you used , like fully extended and compressed?

Where you pleased with the results on and offroad, would they be tolerable on the street on occasion?

If anything you got a BTT!

I dug your build thread on UC4x4

Thanks, Jeff

Whats left? I would like to know.......cage, seats, springs, bumpers??

What are you still interested in? The seats are mine. Springs are still there. What do you want?

Jeff: I really like the Air Shox. There actually Sway-a-Way Shox. They have 18" of travel. Just go to the website and look up the specs. The only bad part was that I had to have a sway bar on the street for sure, no questions asked. They were awesome off road, nothing better, other than coil-overs.

got the crossover?

got the crossover?

Yep, can you pick up? I think it would be kinda expensive to ship to Canada...