|
Afireinside 01-28-2007, 02:09 PM I posted this on CK5 a while back and got know answers so here goes. I have 94' chevy K3500 DRW truck and I get death wobble between 30-35mph. I know all about 60s bot this IFS has me scratching my head any help would be great. Thanks b454rat 01-28-2007, 02:48 PM I had the same thing happen to my old truck (97 2500) Thought it was the CVs, put new ones in,and still did the same thing. Rotors were getting pretty bad, and really warped, got some news, and still did it. Only thing it could be after that was the tires were out of balance. Put my snows on, and drove straight down the road, no shaky, no vibes. Mine started to shake about 40-ish. er1c43 01-28-2007, 06:38 PM mine was the same id say idler and or pitman arm BrokenPartsVille 01-29-2007, 10:09 AM Is it just a wobble or is it worse when it hits a bump? I had a similar problem with my '93 1500, evey time I hit a bump the wheels would shake back and forth violently like the wheels were gonna fall off. I put new ball joints and tie rod ends and it didn't do it again. It had 190K on it though so they were pretty wore out, if you have high miles or alot of aggresive driving/offroading and hit speed bumps at a good speed then that might be what it is.... Afireinside 01-29-2007, 07:19 PM Bumps dont seem to matter but you can make it go away for a little while if you hit the brakes or gas. Thanks er1c43 01-29-2007, 08:34 PM exactly like mine gets real bad on little turns get ur whole steering section checked i bet money its the pitman arm or idler arm ccatlett1984 02-01-2007, 09:32 PM Is it just a wobble or is it worse when it hits a bump? I had a similar problem with my '93 1500, evey time I hit a bump the wheels would shake back and forth violently like the wheels were gonna fall off. I put new ball joints and tie rod ends and it didn't do it again. It had 190K on it though so they were pretty wore out, if you have high miles or alot of aggresive driving/offroading and hit speed bumps at a good speed then that might be what it is.... FYI 1 tons DONT HAVE BALL JOINTS!!!!!!!!! WE HAVE KINGPINS. if you still have the wabble, take off the top kingpin caps and add a washer or two. that will increase the pressure on the pin and take the wiggle out, if that fixes it then I would get a rebuild kit. They are around $70 a side. coolmudrunner 02-01-2007, 10:11 PM FYI 1 tons DONT HAVE BALL JOINTS!!!!!!!!! WE HAVE KINGPINS. if you still have the wabble, take off the top kingpin caps and add a washer or two. that will increase the pressure on the pin and take the wiggle out, if that fixes it then I would get a rebuild kit. They are around $70 a side. Maybe YOU do, but this guy is talking about IFS :shaking: Oh, and there were some ball joint 60's :flipoff2: | |