|
: Convert 1/2 cab EB to full cab? tortuga 01-31-2007, 08:30 PM This may be the stupid question of the week, but in my search for an earlly bronco it has come up. I want a full cab for kids and gear - I know how to find a std full top, but can you convert a 1/2 cab EB to full cab without too much pain? fordman1978 01-31-2007, 08:39 PM you should be able to do it easily. im pretty sure the half cab comes right off just like the full top does. so you should be able to put the full one right on with no trouble. then bolt in a back seat. that should be about all there is to it 69 broncosport 01-31-2007, 10:03 PM You unbolt the half cab top and then remove the bulkhead behind the seats, Then bolt on the full top and put in your rear seat and belts. It's that simple And you can probably sell your halfcab stuff and make some money JoshTurner 02-01-2007, 02:50 AM You unbolt the half cab top and then remove the bulkhead behind the seats, Then bolt on the full top and put in your rear seat and belts. It's that simple And you can probably sell your halfcab stuff and make some money I had a 71 that had the bulkhead in with a full top.... Sell the half & bulkhead & Make ALOT of cash if not rusted welndmn 02-01-2007, 09:22 AM Put a wagon (normal) hard top on it, leave the bulkhead installed. It keeps the squirts in the back :D JDixon 02-01-2007, 10:10 AM Wanna trade?:laughing: | |