I tried searching for something about this but couldn't find much WHEN the search wasn't giving me a blank white screen

I'm swapping in a D60 into my ranger and don't have the clearance for a standard 4 link. I going to try a similar setup as one that would be used on a long arm kit that looks like a Y link. One long lower and the upper comes off on an angle towards the top of the axle in the middle.

I need to know where the upper link attaches to the lower link and the measurements on the axle. I figured this would be the best place to ask a question like that. The hardcore forum would beat my ass for not cutting eveything up and making the tri 4 link work. I may do that down the road when I get the V8 swapped in. But untill then I want to try this setup.

I'm using about 47inch links, maybe shorter when I get the mounts welded up.

Any help would be great. I want to copy this setup...heres a picture

that kit is Rusty's offroad XJ long arm setup...someone should be able to chime in on this


iff you don't get this info here try JU