Whats the cheapest/best place to buy D60 parts. I need: king pin rebuilt kit, 35 spline stubs, u-joints, and 35 spline lockouts or 35 spline flanges. Where should I look and what should I look to pay for each item?

ebay.
dana 60 parts are still ouchie 'spensive

Check locally for someone in your area who deals Spicer sh!t or an axle builder in your area. 9 times out of 10 I've found you can get those parts cheaper from a local guy because there isn't any shipping associated.

Oh yeah make sure you got the plastic ready, that stuff won't be cheap. Joints will be ~$100/pair, lock-outs ~$150/pair, King-pin kits ~50/side (I think- can't remember), don't know on flanges but I think stubs are ~$120/side (correct me if I'm wrong).

Well you didn't post what 60 you have, but if it's a chev. 60, you can have all the parts for your 35 spline conversion for $370 at
http://www.4wdfactory.com/

(No affiliation) Really not a bad price...UJ's, stubs and Warn LO's (or drive-flanges).

I've seen crap go on e-bay for MORE than what I can find it locally, and even less from outside the area. Heck, a USED Summitt 15 gal plastic fuel cell went for $195 a while back! Warn 35 spline LO's went for over $200...

Dunno' about the king-pin re-build kit...I'd start with NAPA.

I was under the impression that Warn hubs broached out to 35spline go boom real easy.

Call Jim's Off Road:
(865) 482-6912

Oh yeah, I need a pair of high steer arms too! Any sources? Also, anyone have the part number for the 35 spline stubs?

None of that shit is cheap. Don't know if you've priced real Spicer u-joints lately. The D60 5-332x goes for around $80 EACH at my local Napa.
Dion

I believe jim @ www.inchwormgear.com is now stocking some if not all of these items. He seems to have fair prices, and good service.

The D60 5-332x goes for around $80 EACH at my local Napa.


Dude I hope you're not paying that. That's outrageous. I just got mine within the last month or so and they were $48 a piece

Naw, a friend got me hooked up with his distributor for $45 a pop. Still, for people who don't know any better, those are the prices out there.
Dion

Parts Mike sold a pair of SPL55 u-joints for $39 each
Drivetrain Warehouse set me up w/35spline stubs for $60 each
I bought a pair of spicer hubs from Brian on this board for $100
Knoll Racing broached me a pair of Spicers for $75
New snap rings at Ace Hardware were $2

That's $375 total plus shipping on the ujoints & the stubbies

How many diffrent ujoints are there for the 60 and which one is best? $80 for a spicer ujoint.:eek: How much are Jack's CTM 60 joints? I am sick of srewing ith the D44 stuff. Finally putting the RC60 together..

Yeah, I'm looking for the price of the 60 CTM's as well.
Aren't they something like 130 ea?

I believe the 60 version of the CTM is $200 ea

Originally posted by racinhound
I believe the 60 version of the CTM is $200 ea

Thanks man, must have been the 44 I was thinking about.