|
DavidW 02-20-2007, 04:15 PM Its not leaking at the adapter plate and it when you spray carb cleaner it sounds like it is leaking on the back side with the little diaphram that says "Weber" on it (about the size of a half dollar) on the drivers side towards the firewall. Any ideas? If I take the cover off of it what is inside and is it going to come shooting out at me and me lose the little parts? Toploader 02-20-2007, 07:09 PM Damn man, from the thread title, I thought you were cookin sumthin. Oh well, good luck David. SCALLYWAG99 02-20-2007, 07:38 PM no kiddin I was gunna bring the beer & bbq sauce DavidW 02-20-2007, 09:34 PM Damn you alchololic freeloaders, I mean my carb. Help! RJ40 02-21-2007, 11:02 AM That is your accelerator pump cover I believe...Yeah, a spring may come out at you when you disassemble it. But, it does not appear to be leaking, as there is no stain of gas etc. on it. I once had a weber a long time back, and it started whistling when the idle cut off solenoid went bad....don't know if you have one though? Worth a look. Cheers! LT 02-21-2007, 12:33 PM Your Land Cruiser is going to blow up at any moment. mantis 02-21-2007, 12:37 PM Easy fix would be to drop a 4.3 in it. :flipoff2: DavidW 02-21-2007, 03:53 PM Easy fix would be to drop a 4.3 in it. :flipoff2: That's going in the 4Runner (thanks by the way, I'll see you at Roundup). I'm going to pull this thing off and see if its leaking. I just cleaned it with carb cleaner so that is why its so clean. Rat70FJ 02-21-2007, 06:11 PM Easy fix would be to drop a 4.3 in it. :flipoff2: Or maybe a freshend up Aisin! mantis 02-21-2007, 07:27 PM Or maybe a freshend up Aisin! You missed the joke... I sent him a '96 4.3 vortec a couple weeks ago ;) CreeperSleeper 02-21-2007, 08:35 PM Your Land Cruiser is going to blow up at any moment. LT would know... I remember seeing a security camera video where...:flipoff2: | |