I have a 2007 Chevy Silverado 1/2 ton 4x4 that I am going to be lifting 12 inches. I want to put a 14 bolt dana 60 in the rear and I was just wondering what kind of modifying do I need to do to make that axle fit, or does it bolt into place? Please let me know what I will have to do to make it work. Thanks, Mike
p.s. And if anyone knows anyone getting rid of an axle, near Vacaville (Sacramento, CA) let me know too. Thanks

(Popcorn in hand)

Any on know where I can find a 14 bolt dana 60?

Is it tuesdays again. I have a dana 60 14 bolt for sale but no 14 bolt dana 60s they are much harder to find

So how does my Dana60 dana70 compare to the dana60 14 bolt? What about my tow rigs rear axle? Its an '05 2500, i s that the dana60 14 bolt or the dana 70 14 bolt?

Obviously he is not interested in the 12 bolt dana 44. It is :smokin: .

so does anyone have any info on my dana 60 swap to my 07 silverado? valley auto: how much do you want for the dana 60? whats the gearing in it?

Just keep what you got if your just driving the streets!

:laughing:
The dana 60 14 bolt is way over rated, go for the dana 44 12 bolt

Well..... your first order of business should probably be to pin point what axle your actually looking for..... a dana 60..... or a 14 bolt:flipoff2:

word

(Popcorn in hand)

Any on know where I can find a 14 bolt dana 60?

Yeah, for $1200, you can have one with a matching one-ton ten bolt.

either one man, well are you just driving it on the street or will you be wheeling it. and whch 14 bolt do you have

do you plan on changing teh front axle also? if not youll prolly need a 14 bolt sf 6 lug axle they can be found int he new vortec max's and also some early 90s 2500 van and trucks

there is a guy in sac selling a d60/d70 combo for 1300



the rancho cordova pnp hasa about 2 doz new burned out rides, several with the new 14ff $150 out the door

Or for big bling, go with a steering Dana 60 from a quadsteer Denali .

i just plan on changing my rear because i am not going to be 4 wheeling in it, just using it for show. i have a 96 chevy silverado with 9" and 37s and i went through one tranny and 10 bolt rear and then got a heavy duty built tranny and 4.56 with a truetrac and i just dont like having a 10 bolt with big tires cuz they break. i haven't lifted my new truck yet, but my plan is 12" with 38's and i would just rather put a 14 bolt back there because even without taking it wheelin, big tires are still hard on the rear end and i want it to hold up. i drive my trucks hard too. i either want to go with 4.56 or 4.88 gearing, what do you think i should do? what kinda acceleration do you think i'd get with 4.10's?

i would go with a 6 lug 14 bolt then should be plenty of rear for the street and youll have the same lug pattern so no need for 2 seperatre rims. 4:56 or 4:88 with 38's 4.10's wont give u enough accerlation
thats just my 2 cents lol

I have a Dana 60 rear w/4-11's out of a 79 F250 that came with my Dana 60 front if your interested for $250 plus shipping. I'm keeping my stock 14 bolt.

I have a 2007 Chevy Silverado 1/2 ton 4x4 that I am going to be lifting 12 inches. I want to put a 14 bolt dana 60 in the rear...does it bolt into place?...Please leave and don't come back.

so does anyone have any info on my dana 60 swap to my 07 silverado?...Please leave and don't come back.

i just plan on changing my rear because i am not going to be 4 wheeling in it, just using it for show....my plan is 12" with 38's and i would just rather put a 14 bolt back there because even without taking it wheelin, big tires are still hard on the rear end and i want it to hold up....Please leave and don't come back.

P.S. Please leave and don't come back.


Edit:
Now that this is in the newbie section...
Are you sure you have a 10-bolt in the back? I thought I heard something about GM finally stepping up to the 9.5" 14SF in the 1/2 tons. In which case a Dana 60 might just be a down grade.

mallcrawlers ftl

:flipoff2: to the prick who wants me to leave.....:flipoff2:
i just came here to ask for a little help with some work i am going to be doing to my truck soon. i wasn't an ass about anything so i don't see why you have to be an ASS. so if you aren't going to be any help with my question, then don't post anything at all.:flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2: :flipoff2:

and why would you talk sh*t about my "mallcrawler?" i have 3 trucks, a 1974 chevy 3/4 ton which is my 4 wheeler, a 96 chevy silverado which is a driver and wheeler, and my new 07 chevy silverado which is never going to touch the mud. why talk sh*t about a bad ass lifted truck? are you jealous because you dont have what i have? :flipoff2: again

Ok,
1. Take a big deap breath
2. Grow up
3. Learn how to ask a good question so you can get a good answer
You asked about a 14 bolt dana 60, you needed to ask about one or the other, not both as if they were one axle.
And yes, it sounds like you have not just one a mall crawler.

moving to newbie

and why would you talk sh*t about my "mallcrawler?" i have 3 trucks, a 1974 chevy 3/4 ton which is my 4 wheeler, a 96 chevy silverado which is a driver and wheeler, and my new 07 chevy silverado which is never going to touch the mud. why talk sh*t about a bad ass lifted truck? are you jealous because you dont have what i have? :flipoff2: again

1 .. Ok so have you seen the top right of the page where it says "EXTREME ROCKCRAWLING" ?

2... Who said it was badass? Not anyone here beside's you.

3...What makes you think anyone is jealous of a bone stock 07 silverado.

4....Alot of people have more time and money into their wheeling rigs than your truck will ever be worth.

5....If you are about poser trucks go over to pavementsucks.com they have plenty of poser's there .Couple good trucks but most are in the same boat as you "GAY MALLCRAWLER'S":rainbow:

Edit:
Now that this is in the newbie section...
Are you sure you have a 10-bolt in the back? I thought I heard something about GM finally stepping up to the 9.5" 14SF in the 1/2 tons. In which case a Dana 60 might just be a down grade.

u can get the 9.5 14sf but its only avaliable in the vortec max package the regular 1500's have the 10 bolt

1 .. Ok so have you seen the top right of the page where it says "EXTREME ROCKCRAWLING" ?

2... Who said it was badass? Not anyone here beside's you.

3...What makes you think anyone is jealous of a bone stock 07 silverado.

4....Alot of people have more time and money into their wheeling rigs than your truck will ever be worth.

5....If you are about poser trucks go over to pavementsucks.com they have plenty of poser's there .Couple good trucks but most are in the same boat as you "GAY MALLCRAWLER'S":rainbow:

yeah, not everyone can have a duct tape front suspension... he asked a question and was unsure about what he needed, cut him some slack... add something constructive or STFU...

and quikz71, this is thick skinned rockcrawling, don't get panies in said wad so quick...

another thing to consider is any sensors that might affect the abs or speedo imput... sure it may physically fit, but are the electronics going to work w/ the new setup????

might be worth finding an OEM swap to get it right... is this a "classic" '07???

yeah, not everyone can have a duct tape front suspension... he asked a question and was unsure about what he needed, cut him some slack... add something constructive or STFU...

and quikz71, this is thick skinned rockcrawling, don't get panies in said wad so quick...

Hey dipshit you ever put something on so you can measure it. The truck never moved so you STFU . I did add something constructive by the way.

1. stating the obvious... not constructive
2. being a smartass... not constuctive
3. see #2...
4. i dont think he was comparing his 30K truck to your pro junk... not constructive
5. stating obvious again, and being smartass... not constructive

so it seems obvious to me that you have nothing "constructive" to add...

1. stating the obvious... not constructive
2. being a smartass... not constuctive
3. see #2...
4. i dont think he was comparing his 30K truck to your pro junk... not constructive
5. stating obvious again, and being smartass... not constructive

so it seems obvious to me that you have nothing "constructive" to add...

Oh I am so sorry. I was just going along the line of what everyone else had to say. Because I agreed......:laughing: :rolleyes:

dont bother with a swap leave the 10 bolt

and why would you talk sh*t about my "mallcrawler?" i have 3 trucks, a 1974 chevy 3/4 ton which is my 4 wheeler, a 96 chevy silverado which is a driver and wheeler, and my new 07 chevy silverado which is never going to touch the mud. why talk sh*t about a bad ass lifted truck? are you jealous because you dont have what i have? :flipoff2: again

because mallcrawlers are gay ... what's the point of modifying something to perform better off-road when it's never going to go off-road?

it's not badass and won't be

jealous? please.... my 2 stage nitrous kit by itself is cooler than your mallcrawler will ever be

:flipoff2:

Oh I am so sorry. I was just going along the line of what everyone else had to say. Because I agreed......:laughing: :rolleyes:
no one else claimed to be constructive... you did....

i wasn't an ass about anything so i don't see why you have to be an ASS.
It wasn't so much that you were being an ass, as it was your asking a completely retarded question and not expecting to get a retarded answer...:shaking:

1 .. Ok so have you seen the top right of the page where it says "EXTREME ROCKCRAWLING" ?

2... Who said it was badass? Not anyone here beside's you.

3...What makes you think anyone is jealous of a bone stock 07 silverado.

4....Alot of people have more time and money into their wheeling rigs than your truck will ever be worth.

5....If you are about poser trucks go over to pavementsucks.com they have plenty of poser's there .Couple good trucks but most are in the same boat as you "GAY MALLCRAWLER'S":rainbow:

1. its pirate "4x4" jackass, which means any 4x4.
2. everybody who likes lifted trucks will like it like my other trucks.
3. first its not even bone stock, 2nd its not going to be bone stock after i lift it after asking my questions about my axlewhich you were no help at all so just be jealous when its done cuz its not yours.
4. i dont need to spend much money to make my truck sweet as hell. its brand new, will have a brand new lift and brand new tires and brand new rims and will shine and will be loved by everyone!
5. girls flock to my "mallcrawlers" so i dont mind u calling them gay, its all good with me. :flipoff2:

another thing to consider is any sensors that might affect the abs or speedo imput... sure it may physically fit, but are the electronics going to work w/ the new setup????

might be worth finding an OEM swap to get it right... is this a "classic" '07???

yeah its the 07 classic. i would like to find one of the 14 bolts off the 1/2 ton chevy's but they cost more.

because mallcrawlers are gay ... what's the point of modifying something to perform better off-road when it's never going to go off-road?

it's not badass and won't be

jealous? please.... my 2 stage nitrous kit by itself is cooler than your mallcrawler will ever be

:flipoff2:
ok queer, i like lifting my trucks because i like how they look. i am not spending $40,000 to beat the f**k out of my truck so i can put more money into it to fix it again ad again. i have a 74 chevy 3/4ton mud truck for that, so i like my daily driver to always look nice and not be broken. i dont care about your nos, i have a whipple supercharger in my truck. all my trucks are high performing big trucks!

It wasn't so much that you were being an ass, as it was your asking a completely retarded question and not expecting to get a retarded answer...:shaking:
how was it a retarted question? i asked about doing a 14 bolt rear axle swap in my truck to replace the 10 bolt.....all i wanted was a little knowledge from people who have maybe done it before or know how to do it, since i haven't and before i go and do it, i wanted to make sure it was going to work and be a good choice.

how was it a retarted question? i asked about doing a 14 bolt rear axle swap in my truck to replace the 10 bolt.....all i wanted was a little knowledge from people who have maybe done it before or know how to do it, since i haven't and before i go and do it, i wanted to make sure it was going to work and be a good choice.
you asked for a "14 bolt dana 60" you might not have meant what you said, but there is no way to decide what you meant on here...

1. its pirate "4x4" jackass, which means any 4x4.
2. everybody who likes lifted trucks will like it like my other trucks.
3. first its not even bone stock, 2nd its not going to be bone stock after i lift it after asking my questions about my axlewhich you were no help at all so just be jealous when its done cuz its not yours.
4. i dont need to spend much money to make my truck sweet as hell. its brand new, will have a brand new lift and brand new tires and brand new rims and will shine and will be loved by everyone!
5. girls flock to my "mallcrawlers" so i dont mind u calling them gay, its all good with me. :flipoff2:
Gothefuckaway:rolleyes:

Gothefuckaway:rolleyes:

yes, with a banning for extreme mallcruisergayuseless-itis

Gothefuckaway:rolleyes:
:flipoff2:

yes, with a banning for extreme mallcruisergayuseless-itis
hey vacaville guy, don't be a dick!

dont be a fuck mall cruising usless truck fag, theres way to many rich shit heads with more money than sence allready.

I have a dana 60 14 bolt axle, Ill let er go for about 1000. Shes a good axle, will fit under anything as long as u have a big hammer and a welder.

5. girls flock to my "mallcrawlers" so i dont mind u calling them gay, its all good with me. :flipoff2:
:laughing:

Quote:
5. girls flock to my "mallcrawlers" so i dont mind u calling them gay, its all good with me.


uh, girls are generaly stupid, large shiny thing bewilder and stupify them.

dont be a fuck mall cruising usless truck fag, theres way to many rich shit heads with more money than sence allready.
i wouldn't call me rich, i'm just a 22 year old who works hard for what i want.

Quote:
5. girls flock to my "mallcrawlers" so i dont mind u calling them gay, its all good with me.


uh, girls are generaly stupid, large shiny thing bewilder and stupify them.


kinda like mice... or rats

ok queer, i like lifting my trucks because i like how they look. i am not spending $40,000 to beat the f**k out of my truck so i can put more money into it to fix it again ad again. i have a 74 chevy 3/4ton mud truck for that, so i like my daily driver to always look nice and not be broken. i dont care about your nos, i have a whipple supercharger in my truck. all my trucks are high performing big trucks!


Who said anything about spending 40g's to lift your truck? You're gettin fucked somewhere there guy.

74 3/4 ton? Real men go one ton or bigger. No D60's, No care. :flipoff2:

This thread would have been so much better if it wasn't in the newb section.

Who said anything about spending 40g's to lift your truck? You're gettin fucked somewhere there guy.

74 3/4 ton? Real men go one ton or bigger. No D60's, No care. :flipoff2:
i'm talking about the truck cost itself and then the lift and shit.......and my 74 isn't done, its in progress and i do what i can with the money i have.

This thread would have been so much better if it wasn't in the newb section.It started in the chevy section and got moved here:flipoff2:

Who said anything about spending 40g's to lift your truck? You're gettin fucked somewhere there guy.

74 3/4 ton? Real men go one ton or bigger. No D60's, No care. :flipoff2:


I would have to agree on the getting raped part.

I would have to agree on the getting raped part.
have you ever bought a new chevy truck before? they go for $30-35k......so you take that and add money for a lift and tires and wheels and gears and whatever extras and you are up to around $40+k......nobody is getting raped

this shit's still going? :laughing:

/thread

have you ever bought a new chevy truck before? they go for $30-35k......so you take that and add money for a lift and tires and wheels and gears and whatever extras and you are up to around $40+k......nobody is getting raped

yes you are.

in the 6years i have owned my truck i have spent around 7k on it including
initial cost 1500
36 tsls 400
37 boggers new 1300
d60 300
tranny swap to 465 400
d44 repairs 250
2 drive shafts 500
2 winches 800
motor 1500

there is a lot tied up in fix it and matainace too.

but i have more fun beating and wheeling that thing then any thing i have ever done. you probably wont have that 40k truck for more than 3 years before you get tired of it or just want a newer becuase your neighbor got one that was bigger than yours.

yes you are.

in the 6years i have owned my truck i have spent around 7k on it including
initial cost 1500
36 tsls 400
37 boggers new 1300
d60 300
tranny swap to 465 400
d44 repairs 250
2 drive shafts 500
2 winches 800
motor 1500

there is a lot tied up in fix it and matainace too.

but i have more fun beating and wheeling that thing then any thing i have ever done. you probably wont have that 40k truck for more than 3 years before you get tired of it or just want a newer becuase your neighbor got one that was bigger than yours.

Lmfao:laughing:

yes you are.

in the 6years i have owned my truck i have spent around 7k on it including
initial cost 1500
36 tsls 400
37 boggers new 1300
d60 300
tranny swap to 465 400
d44 repairs 250
2 drive shafts 500
2 winches 800
motor 1500

there is a lot tied up in fix it and matainace too.

but i have more fun beating and wheeling that thing then any thing i have ever done. you probably wont have that 40k truck for more than 3 years before you get tired of it or just want a newer becuase your neighbor got one that was bigger than yours.

i have only spent $4k on my 74 to buy it and build it. 2007 vehicles dont cost 1500, pieces of shit cost 1500, and even bigger pieces of shit cost 600 like my 74. and then pimp ass people like me flip them around and turn them into something big bad and sweeeeeeeeet! newer trucks cost more to buy stuff for too. last year i spent 3k on my new engine for my 96, 1k on my new tranny, 2k on my rear end and locker, 1500 on my lift, 1k on rims and tires, and thats my labor. add like 5k more if u have someone install it all. and u cant hold onto something forever, u gotta let it go to get something newer and better.

pimp ass people like me flip them around and turn them into something big bad and sweeeeeeeeet!

Are you one of those people that doesn't have any friends because they are constantly talking about how cool they are and how everyone is jealous of their stuff in real life too; or is this something new you're trying for the internet:confused:


If you're such the fab king, you already know the answer to this question. Gear the axle to match the front (or the ratio you're wanting to use with those tires), set the pinion angle, and make the spring perches line up with your springs.
________
Viktorya (http://www.girlcamfriend.com/cam/Viktorya/)

have you ever bought a new chevy truck before? they go for $30-35k......so you take that and add money for a lift and tires and wheels and gears and whatever extras and you are up to around $40+k......nobody is getting raped

, pieces of shit cost 1500, and even bigger pieces of shit cost 600 like my 74. u cant hold onto something forever, u gotta let it go to get something newer and better.

yes but pieces of shit 74 chevys dont have 28 $100 sensors, sheet metal frames, half plastic bumpers all plastic interior, ifs, 4 cat converters, and the goes on of stupid useless shit that isnt needed.

and YOU can hold on to anything for as long as you want.

Like I said before, grow up. you are the same age as me and acting like a complete idiot on here, you give the elder crowd another reason to not help the younger crowd out with knowledge. when some one flames you for the way you asked a question don't get your panties in a bunch, brush it off, look at the way you asked the question, and re-fraise it. you will never get your question answered acting like a stuck up prick.

Like I said before, grow up. you are the same age as me and acting like a complete idiot on here, you give the elder crowd another reason to not help the younger crowd out with knowledge. when some one flames you for the way you asked a question don't get your panties in a bunch, brush it off, look at the way you asked the question, and re-fraise it. you will never get your question answered acting like a stuck up prick.

well said...

well said...

x2

i know i was acting like an asshole. you all got me. but seriously, how can you talk down about a new truck? i am only into lifted trucks, and its nice to have something new that you can ride in comfort, and still have the beautiful lifted truck look. you cant knock it til u try it.

how can you talk down about a new truck?

We're more talking down about said truck's douche bag owner than the truck itself.


its nice to have something new that you can ride in comfort, and still have the beautiful lifted truck look.

The fact that riding in comfort and going for a "look" over performance shows how little you belong here.

you cant knock it til u try it.

You probably say the same thing about gay sex... but I don't plan on trying it either. Go find a show truck forum to ask about your mall crawler. You're not in the right place here.
________
Lovely Wendie (http://www.lovelywendie99.com/)

We're more talking down about said truck's douche bag owner than the truck itself.




The fact that riding in comfort and going for a "look" over performance shows how little you belong here.



You probably say the same thing about gay sex... but I don't plan on trying it either. Go find a show truck forum to ask about your mall crawler. You're not in the right place here.

Lmfao ......:laughing:

i wouldn't call me rich, i'm just a 22 year old who works hard for what i want.

Let me fix this...:shaking:


i have a credit card and I know how to use it.